Fieldmann FDV 2002-E: 1. GENERAL SAFETY INSTRUCTIONS

General safety instructions

1. GENERAL SAFETY INSTRUCTIONS

Important Safety Instructions

Read the Instruction Manual attentively before use.

Carefully remove the tool and any accessories from the box. Do not discard any of the

packing materials until all parts are accounted for.

Keep the product in a dry place.

Read all warnings and instructions attentively. Failure to follow all warnings and instructions

listed below may result in electric shock, fire and/or serious personal injury.

Read operator’s manual carefully. Learn its applications and limitations, as well as the

specific potential hazards related to this power tool. Following this rule will reduce the risk of

electric shock, fire, or serious injury.

Check whether the available power supply parameters correspond to the voltage parameters

specified on the tool.

Check whether the power tool and connections are not damaged.

Connect the power cord to the outlet only when the tool is switched off.

Switch on the tool prior you place it on the workpiece.

Take all safety measures to reduce a risk of electric shock. Avoid body contact with earthed or

grounded surfaces, such as pipes, radiators, ranges and refrigerators.

Sudden temperature changes may result in water condensation on live parts. Prior to use: Let

the power tool reach the workplace room temperature.

Do not use machines, tools and recommended accessories for any than intended purposes!

Clamp the workpiece safely. Secure the workpiece to be drilled in a vice or with clamps to

keep it from turning as the drill bit rotates.

Dress properly. Do not wear loose clothing or jewellery. Loose clothes, jewellery or long hair

can be caught in moving parts. Wear safety shoes and gloves. Contain long hair.

Should dust, chips and sawdust result from your activity or should you work above your head,

always wear safety goggles and dust mask, where appropriate.

While impact drilling, wear suitable ear protective equipment.

While working on ladders, scaffolding or upper floors, always stand on a firm base.

Do not expose power tools to rain or wet conditions. Do not immerse the tool into water.

When operating a power tool outdoors, use an extension cord and other accessories suitable

for outdoor use.

Do not operate power tools in explosive atmospheres.

When the tool is handed over to the third person, the Instruction Manual shall always be

included.

The power tool can be repaired only by a qualified specialist and with the original spare parts.

General safety instructions

WARNING! Do not use a power tool while you are tired or under the influence of drugs,

alcohol or medication. A moment of inattention while operating power tools may result in

serious personal injury. Do not use the power tool in any of the following situations.

Keep the power tool out of reach of children.

Store idle power tools in the original package in a safe place and out of reach of children.

Disconnect the power cord from the power outlet before making any adjustments, changing

accessories, or storing power tools.

Do not abuse the cord. Never use the cord to carry the charger. Do not pull the cord to

disconnect the power tool from the power source.

When working: Do not let the motor stop if the power tool is loaded.

Keep the workplace clean and tidy. A messy workplace increases a risk of injury!

Do not assume unusual body positions while drilling.

Avoid unintentional power tool switching or startup.

Packaging

The product is placed in a package preventing damage during transport. This package is a raw

material therefore it can be handed-over for recycling.

Instructions for use

Before beginning to work with the machine, read the following safety rules and instructions for

use. Familiarize with operating elements and the proper use of the device. Keep the manual in a

safe place for future reference. We recommend keeping the original package including the inner

packaging materials, cash voucher and guarantee card for a period of warranty at minimum.

For a case of transportation, pack the machine into the original box from the manufacturer,

thus ensuring a maximum protection of the product during a possible transport (e.g. moving or

sending into a service station).

Note: If you hand the machine over to next persons, hand it over together with the manual.

Adherence to the attached instructions for use is a precondition for the proper use of the

machine. The operation manual includes also instructions for operation, maintenance and

repairs.

The manufacturer does not take any responsibility for accidents or damages

resulting from the failure to adhere to this manual.

Symbols

2. SYMBOLS