Fieldmann FDB 2002-E: 6. USE AND OPERATION

Specific safety instructions | Use and operation

Do not use any reducers or other auxiliary parts for mounting grinding discs intended for

different spindle diameter.

Make sure that the material is adequately supported or fixed.

Never use grinding disc to remove burrs.

Make sure to prevent the sparks from hitting a person or igniting inflammable goods.

Do not work with the grinder if someone is standing in the line of the grinding disc. Make sure

to clean up the working area around you.

Press the locking knob of the disc (3) only after the engine and spindle of the grinder have

completely stopped !

Remember that the grinding disc will continue to rotate for a while after switching off the

grinder due to inertia.

Always use the auxiliary handle supplied with the tool.

Loss of control over the electric tools could cause injury.

WARNING! Use means of protection against noise, dust and vibrations !!!

WARNING! Keep these safety instructions!!!

6. USE AND OPERATION

This angle grinder is intended for household or hobby use only.

The manufacturer and importer do not recommend using this tool in extreme conditions and

under high load.

Any other additional requirements must be agreed between the manufacturer and the

customer.

The machine is intended for cutting, grinding, rough-working and polishing of metals, stones

and ceramic articles, if a suitable disc is used.

Use the machine and attachments (note the manufacturer‘s specifications) only for the

intended range of applications.

Any other use is strictly forbidden.

Attaching the side handle (Figure B)

Mount the side handle (2) into one of the mounting holes.

How to attach and remove the safety guard (Figure C)

Unscrew the bolt of the safety guard fastening clamp (7).

Attach the safety guard (5) as shown in the figure (C) and tighten the bolt firmly.

Use reverse procedure to remove the safety guard.

WARNING! Never use the grinder without the safety screen.