Fieldmann FDB 2002-E: 5. SPECIAL SAFETY INSTRUCTIONS

General safety instructions | Specific safety instructions

Service

Do not change parts of the tool, do not perform repairs on your own and do not interfere with

the tool’s construction in any way. Leave tool repairs to qualified persons.

Each repair or product modification performed without our company’s permission is

inadmissible (it can cause injury or harm to the user).

Always leave tools to be repaired in a certified service centre. Use only original or

recommended spare parts. This will ensure your and your tool’s safety.

5. SPECIAL SAFETY INSTRUCTIONS

WARNING! Before use, please read these safety instructions and keep them

in a safe place.

Upon failure to follow the instructions specified in this manual, there is a risk of injury.

Angle grinder conforms to applicable technical regulations and standards.

Do not use other accessories except for grinding, cutting and diamond discs.

Never use the tools without the safety screen.

Always use eye protection (protective goggles or safety shield) and hearing protection.

Do not use any cutting and grinding discs for side grinding.

Make sure to keep the vents free of any obstacles during dusty work.

During wall cutting check that there are no electric lines in the walls (using metal detector).

Never water-cool grinding disc.

Do not touch the edge after machining, it may be hot.

Never attach the grinding machine to the work bench.

Make sure that the rotational speed specified on the grinding disc is higher than or equals the

rotational speed of the angle grinder specified in the type label.

Do not cut any material that requires a cut with maximum depth exceeding the depth of the

grinding disc.

Do not cut and grind light metals with higher magnesium content than 80% as such metals

are flammable

Make sure that the grinding disc has the right dimensions and is correctly mounted on the

spindle.

Handle the grinding discs very carefully and in accordance with instructions supplied with the

grinding disc.

Inspect the grinding disc before each use.

Do not use grinding discs that are cracked or otherwise damaged.

Make sure that the grinding disc is mounted according to instructions.

After mounting the grinding disc, let the grinder run at idle speed in a safe place. If the grinder

shows strong vibrations or if the grinding disc shows visible damage, immediately turn off the

grinder and try to identify the cause.