Eneo HDB-2080MIR: DE

Factory

MAIN

Descriptions

Default

FOCUS ADJ. See Full Manual for detail.

SCENE

NORMAL NORMAL – Optimized for the normal indoor and

ENHANCE

outdoor in the good lighting condition.

WDR – Improves the visibility for the high bright area

and the dark area by the double captures of image

DE

with LONG and SHORT exposures. With WDR ON,

the frame rate becomes half by the double captures.

EN

WDR level can be selected from LOW, MID and

FR

HIGH. Care should be taken to select this mode

because video may lose its quality in some environ-

PL

ments by the over compensation.

• CVBS video signal - Even if WDR is set to ON,

RU

it shows OFF on CVBS video. It should be

considered when installer adjusts the video with

installation monitor.

D-WDR – Improves the visibility by compensating

the video gain for the dark area. Noise can increase

in the dark area accordingly.

BLC – Improves the visibility for the dark object by

the bright back light. Outside area of BLC window

can over saturate. BLC has a target window for

compensation and its size and position can be set

by H-POS, V-POS, H-SIZE and V-SIZE.

HLC – Cuts out the highlight area with black mask

and excludes it from compensation.

3D-NR MID 3D-NR is a very sophisticated and powerful time-

based noise reduction technology by monitoring the

noise for the several video frames and defining and

eliminating them consecutively at low light.

Higher setting reduces noise much more but results

in losing the sharpness and the tail effect or the

motion blur for the fast moving target at low light.

21

Factory

MAIN

Descriptions

Default

DAY/NIGHT EXT for IR

Sets DAY / NIGHT to EXT, AUTO, COLOR and B/W.

LED

SMART IR can be set to reduce the saturation by

the strong IR illumination in the night in any menu of

AUTO

EXT, AUTO and B/W(NIGHT)

for No IR

Setting SMART IR in any menu is identically applied

LED

to other menu. Zero(0) turns off SMART IR and High

setting avoids the saturation strongly but the corners

will be darker accordingly.

EXT – DAY or NIGHT is determined by the built-in

light photo sensor. Camera with IR LED must be set

to EXT.

AUTO – Used when DAY or NIGHT is determined by

light level through the lens and DAY from/to NIGHT

is switched automatically by the scene brightness.

D<-->N THRESHOLD, D<->N GAP, D<->N DELY

and SMART IR can be set in the menu.

When EXPOSURE>AGC is less than 10, DAY/

NIGHT AUTO is disabled and forcibly switches to

___(DAY) to avoid the malfunction.

EXT, B/W(NIGHT) and COLOR(DAY) is independ-

ent on AGC level.

When EXTERNAL IR LED is used with NON IR LED

model, please setto IR LED MODE ON.

B/W(NIGHT) – Forcibly removes IR cut filter and

switches to B/W regardless of light level.

COLOR(DAY) – Forcibly DAY/NIGHT is disabled and

outputs color video.

PICT ADJUST - Sets WHITE BAL, SHARPNESS, COLOR GAIN, GAM-

MA and SHADING

SPECIAL - Sets MIRROR/FLIP, PRIVACY, MOTION, MOTION

ZOOM, PIXEL DEFECT, TITLE SET, DISPLAY, DE-

FOG, and POINTING ZOOM.

SYSTEM - Sets TV SYSTEM, RESOLUTION, COMM.SETUP,

LANGUAGE and FACTORY DEFAULT.

22