Binatone MGR-3001: BEFORE USE

BEFORE USE

 Remove all packing materials from the

appliance.

 Wipe the housing with a damp lint free

cloth and wash all parts to be in contact with

food.

 Rinse the washed parts of the appliance

with clean water and completely dry them

before assembling.

DIRECTIONS FOR USE

Before assembling/dismantling make sure the

appliance is turned off and unplugged.

Assembling

1. Insert the screw (9) into the operating unit

(5).

2. Put the cross-shaped cutter (10) on the end

of the screw (9) so that the rounded tip of the cutter (10) is

facing the screw (9). Make sure the cross-shaped cutter (10)

is properly fixed.

3. Place the selected perforated disc (11) on top of the cutter

(10).

4. Tighten the seal ring (12).

5. To attach the operating unit (5) to the housing (1) press lock

button (3) and insert operating unit (5) into the opening in the

grinder’s housing, push gently and turn anticlockwise.

6. Place the tray (6) on top of the funnel of the operating unit

(5). Now the grinder is ready for operation.

Dismantling

1. Press lock button (3),push gently on the operating unit (5),

turn it clockwise. Remove the operating unit (5) from the mo-

tor.

2. Untwist the seal ring (12).

3. Remove the perforated disk (11) and cross-shaped cutter (10)

from the screw (9). Remove the screw (9) from the operating

unit (5).

Use of the appliance

1. Place the grinder on a dry, smooth flat horizontal surface.

2. Remove the meat from the package. Cut out all bones and

tendons from the meat prior to grinding. Cut the meat into

pieces that will fit easily into the grinder funnel.

3. Assemble the meat grinder and plug it into a power supply

with voltage matching the information on the appliance.

4. Put the meat into the tray (6).

5. Switch on the appliance using the On/Off/REV button (2).

6. Gradually push the meat pieces into the funnel using the

pusher (7). Do not push too hard.

7. After use switch the appliance off and unplug it from the wall

6