Yamaha ns-b310: SUPPLIED ACCESSORIES PLACING THE SPEAKERS For NS-B310
SUPPLIED ACCESSORIES PLACING THE SPEAKERS For NS-B310: Yamaha ns-b310
Table of contents
- PRECAUTIONS
- SUPPLIED ACCESSORIES PLACING THE SPEAKERS For NS-B310
- For NS-C310
- CONNECTIONS TO YOUR AMPLIFIER
- REMOVING THE FRONT SPECIFICATIONS COVER

■To mount the speakers on a wall by using
SUPPLIED ACCESSORIES
the attached mounting bracket
Fasten screws into a firm wall or wall support as shown in the
(Only for NS-C310)
figure, and hang the holes of the mounting bracket on the
protruding screws.
* Make sure that the screws are secured in the narrow sections
of the holes.
Tapping screw
(Available at the hardware store)
Fastener × 2
Diameter. 3.5 to 4 mm
(1/8” to 3/16”)
PLACING THE SPEAKERS
Min.
3 mm
20 mm
For NS-B310
(1/8”)
(13/16”)
■ Using as 2ch stereo speakers
Better stereo images will be obtained when the speakers are
26 mm
(1”)
slightly angled in towards the listeners.
Wall or wall
support
You can also use the screw holes on the bottom of the speaker
for installing the speaker using a commercially available
speaker bracket (if you do not use the attached mounting
bracket).
Screw holes
Diameter: 6 mm (1/4”)
Hole Depth: 14 mm (9/16”)
■ Using as front speakers and surround
60 mm (2-3/8”)
speakers in a surround system
Position the speakers on both sides of the TV. The positioning of
speakers is important, since this dictates the overall sound quality
of the surround system. Set up the speakers on the basis of your
Note
listening position by following the owner’s manual supplied with
your amplifier.
Placing this unit too close to a CRT TV set might impair
picture color or create a buzzing noise. Should this happen,
And mount the speakers on a wall or place the speakers on a shelf.
move the speaker away (more than 20 cm (7-7/8”)) from the
Determine the best position by following the owner’s manual
TV set.
supplied with your amplifier.
When using a PDP or LCD TV, it would not happen.
NS-B310
WARNING
Front
• NS-B310 weighs 1.6 kg (3 lbs. 8 oz.). Do not mount it on thin
plywood or a wall with soft surface material. If mounted,
the screws may come out and the speaker may fall. This may
Subwoofer
damage the speaker, or cause personal injury.
• Do not install the speaker on a wall with nails, adhesives, or
any other unstable hardware. Long term use and vibrations
may cause it to fall.
• To avoid accidents resulting from tripping over loose
speaker cables, fix them securely to the floor or wall.
English
NS-C310
NS-B310
Surround
1 En






