Yamaha ns-b310: REMOVING THE FRONT SPECIFICATIONS COVER
REMOVING THE FRONT SPECIFICATIONS COVER: Yamaha ns-b310
Table of contents
- PRECAUTIONS
- SUPPLIED ACCESSORIES PLACING THE SPEAKERS For NS-B310
- For NS-C310
- CONNECTIONS TO YOUR AMPLIFIER
- REMOVING THE FRONT SPECIFICATIONS COVER

REMOVING THE FRONT
SPECIFICATIONS
COVER
NS-B310
Type .................... full-range acoustic suspension speaker system
The front cover is attached to protect the speaker, but you can
Non-Magnetic shielding type
remove it if necessary.
Driver.......................................8 cm (3-1/8”) cone full-range × 2
The front cover is fixed by magnets. Hold the speaker with one
Impedance...............................................................................6 Ω
hand, and pull the front cover gently with the other to remove it.
Frequency Response ............................80 Hz to 35 kHz (-10 dB)
to 50 kHz (-30 dB)
NS-B310
Nominal Input Power........................................................... 40 W
Maximum Input Power ...................................................... 120 W
Sensitivity ........................................................... 87 dB/2.83 V/m
Dimensions (W × H × D)............................ 107 × 200 × 127 mm
(4-3/16” × 7-7/8” × 5”)
Weight............................................................1.6 kg (3 lbs. 8 oz.)
NS-C310
Type ..........................2-way acoustic suspension speaker system
Non-Magnetic shielding type
Driver...................................... 6.5 cm (2-9/16”) cone woofer × 4
NS-C310
3 cm (1-3/16”) soft dome tweeter
Impedance...............................................................................6 Ω
Frequency Response ........................... 90 Hz to 45 kHz (-10 dB)
to 100 kHz (-30 dB)
Nominal Input Power........................................................... 40 W
Maximum Input Power ..................................................... 120 W
Sensitivity .......................................................... 90 dB/2.83 V/m
Crossover Frequency ......................................................... 6 kHz
Dimensions (W × H × D).............................. 440 × 94 × 125 mm
Notes
(17-5/16” × 3-11/16” × 4-15/16”)
• When removing the cover, be careful that you don't touch
Weight............................................................2.9 kg (6 lbs. 6 oz.)
the drive units, and don't exert excessive force with any
tools.
• Specifications subject to change without notice due to product
• There are magnets on the reverse side of the front cover. Do
improvements.
not place a front cover close to objects that might be affected
• Care should be taken not to exceed the input power values noted
by magnets, such as CRT TV, clock, magnetic card,
above.
diskette, etc., after removing it.
• A speaker cable is not included with this model.
Taking care of the speaker
When you wipe this unit, do not use chemical solvents (e.g.,
alcohol or thinners, etc.): this might damage the finish. Use a
clean, dry cloth. For difficult soils, dampen a soft cloth in
water, wring it out, and then wipe with the cloth.
4 En






