NAD HTR 8: ENGLISHFRANÇAISESPAÑOLITALIANODEUTSCHNEDERLANDSSVENSKAРУССКИЙ

Note

Macros are independent of the cur-

rently selected device.

ENGLISHFRANÇAISESPAÑOLITALIANODEUTSCHNEDERLANDSSVENSKAРУССКИЙ

RECORDING MACROS

To record a macro, simultaneously

press-and-hold for 3 seconds both the

[MACRO] key and the HTR 8 function key

to which you wish to assign the macro,

until the status LED turns green. The

macro button will also light up.

Press the sequence of function keys to be

recorded into the macro, being sure to

rst press the requisite DEVICE SELECTOR

key for each function (you may switch

devices while recording the macro as

many times as necessary), allowing you to

create macro containing commands from

more than one DEVICE SELECTOR “page.”

When you have nished entering the

desired command sequence, press

[MACRO] again to store the macro; the

Learn LED and [MACRO] key illumination

will turn o.

Note

Each macro can store a maximum of

64 command steps. If you exceed this

number, the macro will be stored au-

tomatically after the 64th command

is added.

Example: Record a Macro to the [0] key

to turn ON the NAD Receiver, turn ON the

DVD Player, Select Input 1 (Source 1) and

commence disc playback of connected

Source 1 device (as in the DVD player)

• On the HTR 8, simultaneously press-

and-hold [MACRO] and [0] (numeric

zero); the Learn LED turns steady

green.

• Press [AMP], press [ON]; press [DVD],

press [ON]; press [AMP], press [1]

(Input 1); press [DVD], press [4] (Play)

– the Learn LED blinks as each step is

added.

· Press [MACRO] again to exit the

macro-record mode.

To clear a macro, perform the above steps

without entering any functions.

7

HTR8_eng_OM_v03.indd 7 20/01/2012 1:46am