NAD HTR 8: ENGLISH FRANÇAIS ESPAÑOL ITALIANO DEUTSCH NEDERLANDS SVENSKA РУССКИЙ

To enter Delete Mode, simultaneously

ENGLISH FRANÇAIS ESPAÑOL ITALIANO DEUTSCH NEDERLANDS SVENSKA РУССКИЙ

press-and-hold for 3 seconds both the

desired key’s DEVICE SELECTOR key and

the [RTN] key, until the Learn LED turns

green. Press the function key whose com-

mand you wish to delete; the Learn LED

ashes; the number of times indicates

which type of function has become

active - see the table below. Press the

active DEVICE SELECTOR key again to exit

Delete Mode.

Note

You may delete multiple function-key

commands on the same DEVICE

SELECTOR “page”, but to delete from

more than one DEVICE SELECTOR

page you must exit Delete Mode and

then re-enter it on the required page.

Flashes Command Type

1 Default Library Command

2 Copied Library Command

3 Learned Command

LOADING CODE-LIbRARIES

The HTR 8 can store a dierent library of

default NAD codes for each of its DEVICE

SELECTOR “pages”. If the original default

library does not control your NAD CD

player, BD player, DVD player or other

component, follow the procedure below

to change the code-library.

Begin by ensuring that the component

you wish the HTR 8 to control is plugged

in and powered-up (“ON”, not merely

in standby). To enter the HTR 8’s Library

Mode, simultaneously press-and-hold

for 3 seconds both the desired DEVICE

SELECTOR key and the [A/V PSET] key,

until the Learn LED turns green.

While keeping the HTR 8 pointed toward

the component, enter the rst appropri-

ate three-digit code-library number from

the table below and then press [OFF]. If

the component turns o, press [ENTER] to

accept that code-library number and exit

the Library Mode. If the component does

not turn o, enter the next three-digit

code-library number from the table.

When you enter the correct number the

component will turn o; press [ENTER] to

accept that code library number and exit

the Library Mode.

10

HTR8_eng_OM_v03.indd 10 20/01/2012 1:46am