NAD HTR 8: ENGLISHFRANÇAISESPAÑOLITALIANODEUTSCHNEDERLANDSSVENSKAРУССКИЙ

Example: Learning “DVD Pause”

Position the HTR 8 and your DVD player’s

remote as described above.

• On the HTR 8, simultaneously press-

ENGLISHFRANÇAISESPAÑOLITALIANODEUTSCHNEDERLANDSSVENSKAРУССКИЙ

and-hold [DVD] and [RES]; the Learn

LED turns steady green.

• Press the HTR 8’s Pause [j] key; the

Learn LED turns amber.

• Press-and-hold the correspond-

ing Pause key of your DVD player’s

remote control; the HTR 8’s Learn LED

ickers amber and then turns solid

green. The command is learned.

• Press [DVD] again to exit the learning

mode.

Notes

· The HTR 8 can learn up to 360 com-

mands making use of all the DEVICE

SELECTOR and function keys.

· The DEVICE SELECTOR keys can

themselves be congured to learn a

command.

· Press and hold a congured DEVICE

SELECTOR for at least 2 seconds to

execute a function assigned to the

particular DEVICE SELECTOR key.

· Short press of a congured DEVICE

SELECTOR will just switch the active

device.

CANCEL OPERATION

You can cancel conguring a key, by

pressing the active DEVICE SELECTOR key

before the learn process is complete; the

Learn LED will turn red.

PUNCH THROUGH

The HTR 8’s “punch-through” function

allows you to retain a function key from

one Device Select “page” to another, so

that, for example, the AMP [SURR MODE]

function might still control the NAD A/V

receiver when the DVD DEVICE SELECTOR

page is active.

Note

The HTR 8’s [VOL D/F] keys are pre-

programmed as “punched-through”

for all Device Select pages: [VOL

D/F] will operate the NAD’s master-

volume regardless of the currently

selected device. The [SURR] [CENTER]

and [SUB] Channel Volume controls

similarly are pre-programmed as

punched-through.

To set a punch through, after entering

the Learning Mode, and pressing the de-

sired key to be punched through, simply

press the device key twice of the device

to punch through to. The status LED will

turn green; press the DEVICE SELECTOR

key again to exit Learning Mode.

5

HTR8_eng_OM_v03.indd 5 20/01/2012 1:46am