NAD HTR 8: ENGLISH FRANÇAIS ESPAÑOL ITALIANO DEUTSCH NEDERLANDS SVENSKA РУССКИЙ

All of the function keys on the [AMP]

ENGLISH FRANÇAIS ESPAÑOL ITALIANO DEUTSCH NEDERLANDS SVENSKA РУССКИЙ

DEVICE SELECTOR “page” are pre-

programmed to control NAD ampliers,

preampliers and receivers. The HTR 8

can also command many other NAD

components from its [DVD], [CD], [BD]

and [TUNER] pages.

It is important to note that certain

HTR 8 keys perform dierent functions

depending on the selected DEVICE

SELECTOR “page”. The colour of the

DEVICE SELECTOR key-labelling cor-

responds to the labelling of the function

keys. Most centrally, the black [AMP]

DEVICE SELECTOR “page” corresponds to

the black keys: When the HTR 8’s [AMP]

DEVICE SELECTOR page is active; these

keys select the amplier or receiver

inputs. Similarly, the purple [DVD] DEVICE

SELECTOR “page” corresponds to several

purple labels and so on.

LEARNING CODES FROM

OTHER REMOTES

Begin by positioning the HTR 8 “nose-to-

nose” with the source remote so the two

devices’ infrared windows are about 2

inches apart.

• Enter Learning Mode: On the HTR 8,

simultaneously press-and-hold for

3 seconds both a DEVICE SELECTOR

key and the [RES] key until the Learn

LED of the HTR 8 turns steady green.

• Press the HTR 8’s function key you

wish to teach a command; the Learn

LED will turn amber.

• Press-and-hold the function key on

the source remote: The HTR 8’s Learn

LED will icker amber for a second

or two, then turn solid green. The

command is learned.

• Press the HTR 8’s DEVICE SELECTOR

key again to exit the learning mode.

If the Learn LED does not icker amber

you may need to vary the distance

between the remotes. If the Learn LED

turns red rather than green, that par-

ticular command of that source remote

command could not be learned. In rare

instances, there maybe some IR format

that is not compatible with the HTR 8.

4

HTR8_eng_OM_v03.indd 4 20/01/2012 1:46am