HEIDENHAIN ND 1400 Quick Start: Setup

Setup

Initial power up

Software setup

3. Enter the Supervisor Password

• Press the POWER SWITCH to power

The operating parameters of the

• Touch the SUPERVISOR setup menu

the ND 1400. The startup screen is

ND 1400 must be configured prior

item and then touch the PASSWORD

displayed.

to using it for the first time, and any

field.

time part measurement, reporting or

• Enter the supervisor password.

communication requirements change.

Settings will be retained until:

• The data-backup battery is changed

• The data and settings are cleared

• Software upgrades are performed

Caution

Setup parameters control the operation

of the ND 1400 and are password-

• Press the FINISH key to display the

protected. Only qualified personnel

current axis positions on the DRO

should be given password access to

4. Calibrate the touch screen

screen.

setup screens.

The touch screen should be calibrated

to respond correctly to each operator’s

1. Display the setup menu

finger tip size and pressure.

• Touch the QUESTION icon

• Touch the MISCELLANEOUS setup

once, and then touch the

menu item and then touch the CAL

SETUP button twice to

button.

display the SETUP MENU.

• Follow the instructions shown on the

LCD screen.

5. Select a probe

• Touch the PROBE setup menu item

and then touch the PROBE HOLDER

field to select the desired probe type.

• Prepare for probe qualification by

touching the QUALIFICATION

DIAMETER field and entering the

qualification sphere diameter in the

correct unit of measure.

6. Select the point entry type

• Touch menu items to select them.

Backward or forward annotation can be

Scroll the setup menu using the

used to collect data points. Backward

ARROW buttons.

annotation allows the user to probe

any number of data points to measure

2. Select the language

a feature. Forward annotation limits

Touch the LANGUAGES setup menu

the number of points to a required

item and then touch the desired

minimum.

language.

• Touch the MEASURE setup

menu item and then touch the

ANNOTATION field to select

Note:

BACKWARD or FORWARD

When the language is changed, power

annotation.

to the ND 1400 must be cycled off and

then back on.

2