Eneo HDB-1080Z03IR B: DE
DE: Eneo HDB-1080Z03IR B
Factory
MAIN
Descriptions
Default
• CVBS video signal: Connecting 2nd video to
CVBS port disables WDR function temporary. It
should be considered when installer adjusts the
video with installation monitor via CVBS video
signal.
D-WDR – Improves the visibility by compensating
DE
the video gain for the dark area. Noise can increase
in the dark area accordingly.
EN
BLC – Improves the visibility for the dark object by
FR
the bright back light. Outside area of BLC window
can over saturate. BLC has a target window for
PL
compensation and its size and position can be set
by H-POS, V-POS, H-SIZE and V-SIZE.
RU
HLC – Cuts out the highlight area with black mask
and excludes it from compensation.
3D-NR MID 3D-NR is a very sophisticated and powerful time-
based noise reduction technology by monitoring the
noise for the several video frames and defining and
eliminating them consecutively at low light.
Higher setting reduces noise much more but results
in losing the sharpness and the tail effect or the
motion blur for the fast moving target at low light.
DAY/NIGHT EXT Sets DAY / NIGHT to EXT, AUTO, COLOR and B/W.
SMART IR can be set to reduce the saturation by
the strong IR illumination in the night in any menu of
EXT, AUTO and B/W(NIGHT)
Setting SMART IR in any menu is identically applied
to other menu. Zero(0) turns off SMART IR and High
setting avoids the saturation strongly but the corners
will be darker accordingly.
21
Factory
MAIN
Descriptions
Default
EXT – DAY or NIGHT is determined by the built-in
light photo sensor. Camera with IR LED must be set
to EXT.
AUTO – Used when DAY or NIGHT is determined by
light level through the lens and DAY from/to NIGHT
is switched automatically by the scene brightness.
D<-->N THRESHOLD, D<->N GAP, D<->N DELY
and SMART IR can be set in the menu.
When EXPOSURE>AGC is less than 10, DAY/
NIGHT AUTO is disabled and forcibly switches to
___(DAY) to avoid the malfunction.
EXT, B/W(NIGHT) and COLOR(DAY) is independ-
ent on AGC level.
When EXTERNAL IR LED is used with NON IR LED
model, please setto IR LED MODE ON.
B/W(NIGHT) – Forcibly removes IR cut filter and
switches to B/W regardless of light level.
COLOR(DAY) – Forcibly DAY/NIGHT is disabled and
outputs color video.
PICT ADJUST - Sets WHITE BAL, SHARPNESS, COLOR GAIN, and
GAMMA.
SPECIAL - Sets MIRROR/FLIP, PRIVACY, MOTION, PIXEL DE-
FECT, TITLE SET, DISPLAY, DEFOG, and POINTING
ZOOM.
SYSTEM - Sets TV SYSTEM, RESOLUTION, COMM.SETUP,
LANGUAGE and FACTORY DEFAULT.
EXIT - SAVE & EXIT – Exits the menu after saving the
parameters.
EXIT – Exits the menu without saving the menu.
Further information
The Full Manual is available from the eneo web site at www.eneo-security.com or from
the CD supplied with this product.
22
