Acme GH200: Safety Tips

GB

Breakdown code:

H1 Temperature sensor open circuit inside hob

H2 Environment temperature is higher than 85°C

E2 Environment temperature sensor open circuit

E3 Environment temperature sensor short circuit

E4 Heating 5 minutes short circuit alarm

Safety Tips

1. Overheating protection: if the hob appears to have overheated because of a breakdown or negligence.

2. The load weight of the surface shall not be over 10 kilograms.

3. Don’t unplug the power cord plug immediately after shutdown. Keep the fans operating to lower the

temperature inside. Please don’t block the air intakes when using.

This product is not suitable for children or disabled persons, to keep from danger.

Using knowledge

Please be sure to read this part of the contents and instructions carefully. So you can use the infrared hob

correctly and safely.

1. Please conrm if the model, output power of the used power socket match with the infrared hob’s. Also if

the voltage, current, power of the alternating power connected to the product meet the requirement of

the infrared hob.

2. Before you use the infrared hob for the rst time, please clean the surface and wipe o the potential residue

due to the package on the hob surface. Also, please clean it after use, general cleaning is often done after

the hob has cooled. Please refer to the “method of maintain and clean” for details.

6