Tanita BC-730: CHANGING THE WEIGHT MODE

CHANGING THE WEIGHT MODE

Note: For use only with models containing the weight mode switch.

You can change the weight unit by using the switch on the back of the scale.

Note: If weight mode is set to pounds or stone-pounds, the height programming mode will be automatically set to feet and inches.

Similarly, if kilograms is selected, height will be automatically set to centimeters.

SETTING (RESETTING) DATE AND TIME

1. Set Date

Insert batteries into the scale and then press any button to

start the Year setting. Press the <Up/Down> buttons to set

year and then press SET button. The unit will beep once

to confirm.

2. Set Hour

Press <Up/Down> buttons to set hour and then press SET

button.

The unit will beep once to confirm.

3. Set Minute

Press <Up/Down> buttons to set minute and then press

SET.

The unit will beep twice to confirm the programming.

The power will then shut down automatically.

Note:

•Afteryoureplacethebatteriesorifyouwanttoresetdateandtime,pressandholdtheArrow(recall)buttontobeginthedateand

time programming process. Replacing the batteries will cause the loss of date and time settings.

•60secondsormoreofinactivitywillcauseautomaticshutoffduringthisprocess.Nodatawillbesavedasaresult.

•Ifyoumakeamistakeorwishtoturntheunitoffbeforeyoucompletetheprogramming,presstheOFFbuttontoturntheunitoff.

No data will be saved as a result.