Phottix Strato: En

En

INSTRUCTION MANUAL

9. Connecting to the camera hot shoe

6. Turning receiver on/o

Turn o the camera.

To turn on the Phottix Strato Recevier– move

Slide the Strato transmitter into the camera’s

the power switch to the “ON” position.

hot shoe mount.

To turn o the Phottix Strato Recevier - move

Turn the Strato locking ring until tight.

the power switch to the “OFF” position.

Turn on the camera and set the shooting mode.

7. Setting Channels

10. Connecting to the camera sync

The Phottix Strato has four channel settings.

Move the Channel Selector Switch to 1, 2, 3, or 4

port by 3.5mm Sync cable (included)

to select a channel.

The Strato Transmitter can also be attached to a

Make sure Phottix Strato transmitters and re-

camera’s PC Sync port if you do not wish to use

ceivers are set to the same channel.

the hot shoe. Turn o the camera.

Connect a cable to Strato transmitter 3.5mm

8. Fire All Channels Switch

port. Connect the opposite end of the cable to

To re all ashes or strobes on dierent chan-

the camera’s PC Sync Port.

nels move the Fire All Channels Switch on the

Turn on the camera.

transmitter to the ON position.

All nearby Strato receivers will re ashes/

strobes, or trigger connected camera shutters.

5