Phottix Strato: 11. Connecting a ash to the Strato

11. Connecting a ash to the Strato

tix Strato receiver. Set the ash to Manual mode.

transmitter or receiver hot shoe

* It is not unusual for the ash to discharge once

Turn o the ash and the Phottix Strato receiver.

after turning on the Phottix Strato.

Slide the ash into the transmitter’s or receiver’s

13. Using the Strato as a wireless

hot shoe mount. Lock the ash with the ash’s

shutter release*

locking mechanism. Turn on the ash and the

Turn o the camera and the Phottix Strato receiver.

Phottix Strato receiver. Set the ash to Manual

Attach the correct Phottix Accessory Cable for your

mode (receiver only).

camera make and model to the 2.5 mm Accessory

* It is not unusual for the ash to discharge once

Port on the Strato receiver Attach the other end of

after turning on the Phottix Strato.

the cable to the camera’s remote port. Turn on the

12. Connecting the Strato receiver

camera and Phottix Strato receiver. Consult your

by PC sync

camera manual for specic settings for remote use.

Turn o the ash/strobe and the Phottix Strato

Using the Phottix Strato transmitter will allow for

receiver. Connect a cable to the receiver’s 3.5

remote wireless shutter release functions. The Strato

mm PC Sync Port. Connect the opposite end of

test/shutter button functions the same as a camera

the cable to a ash or studio strobe (A 6.3 mm

shutter button: A half-press of the test/shutter but-

adapter is included for studio strobes with larg-

ton will autofocus, a full press will take a photo.

er ports). Turn on the ash/strobe and the Phot-

*On compatible cameras

6