Phottix Strato II Multi: Please Note: Strato Multi receivers are designed

4. Replace the battery cover and push back into the

Please Note: Strato Multi receivers are designed

locked position.

to work in Manual Exposure mode and have no TTL

functions.

Turning transmitter and receiver on/

o

Only use ashes designed for Digital SLR cameras (6V)

1. To turn on the Phottix Strato Multi transmitter or

on the Strato Multi transmitter hot shoe when on the

receiver– move the power switch to the “ON” position.

camera.

2. To turn o the Phottix Strato Multi transmitter or

receiver - move the power switch to the “OFF” position.

Tip: Turn o all devices – ashes/strobes, cameras, and

Phottix Strato Multi transmitters and receivers - when

Test Button

connecting and disconnecting devices.

1. The Test Button will test re ashes/strobes.

2. To Test: Press the transmitter Test Button. Flashes

Keep in mind: The Strato Multi will trigger Strato

connected to Phottix Strato Multi receivers on the

4-in-1 wireless triggers. When shooting in public bear

same channel and selected groups will re when the

in mind other photographers using the same products.

transmitter test button is pressed.

3.Pressing the receiver Test Button will test re ashes or

Inserting batteries

strobes connected to that receiver.

1. Press the battery cover in while pushing it away from

the Strato Multi transmitter or receiver. The battery cover

For Wireless Shutter Release: See Using the Strato Multi

will snap open and slide open.

as a wireless shutter release below

2. Remove the battery cover from the Strato Multi.

3. Insert AAA batteries.

4