Eizo FlexScan S1932: Installation/storage of the monitor with EZ-UP stand

TroubleshootingSetting/AdjustmentPrior to use Installation

Installation/storage of the monitor with EZ-UP stand

If you have purchased the monitor with EZ-UP stand, please perform the following procedures when installing and

storing.

English

The stand of the monitor is fastened with a belt at the packing. Unfasten the belt after placing the monitor on the desk or

the stand may be unfolded suddenly. Keep the belt for future movement or transportation of the monitor.

Also, remove the cushion from the rear of the monitor at the installation.

Installing the monitor

Lift the monitor screen in the arrow direction.

1

Liftitbyholdingthepanelportionwithbothhands,untilyoumayhearthe“click”.Ifitclicks,themonitor

standlockissurelyfunctionedtousethemonitor.

Lower the monitor screen position, and unfasten the belt.

2

Cushion

StandBase

Hinge

Belt

Attention

•Unfasteningthebeltmaycausethestandtounfoldsuddenly.

•DonotusethemonitorwhentheEZ-UPstandisfolded.

•Afterreleasingthelock,takecarenottocatchyourngerswhenloweringthemonitor.Thismaycause

injuryordamagethemonitor.

Storage the monitor

Remove the cable holder.

1

Lower the monitor screen position until the hinge of the stand touches the stand

2

base, and fasten the stand with the belt.

Adjustthemonitoranglesoasthemonitorscreennottotouchthestandbase.

Fall the monitor screen backward with keeping slide-up the “Unlock” knob.

3

Whenmaximallytilting(25º)themonitorscreenbackward,the“Unlock”knobmaybehardtobeslid-up.

Then,slightlytiltupthemonitortoverticaldirectionandslide-upthe“Unlock”knob.

“Unlock”knob

3