Eizo FlexScan S1501-B: Connecting Cables

English

3

TroubleshootingSetting/AdjustmentPrior to use Installation

Connecting Cables

Attention

• When replacing the current monitor with a S1501-B monitor, be sure to change the PC settings for

resolution and vertical frequency to those which are available for the S1501-B monitor referring to the

resolution table (back of cover page) before connecting the PC.

NOTE

•

When connecting two PCs to the monitor, refer to the User’s Manual on the CD-ROM.

Check that the monitor and the PC are powered off.

1

Connect the monitor to the PC with a signal cable that matches the connectors.

2

After connecting the cable connectors, tighten the screws of the connectors to secure the coupling.

CD player, etc

Connectors on

Connectors on

the PC

the monitor

Audio output

Audio

input

connector

Stereo mini jack cable (supplied)

connector

Signal cable FD-C39 (supplied)

DVI-D connector

DVI-D connector

Digital connection

or

D-sub mini 15-pin

D-sub mini 15-pin

connector

Signal cable MD-C87 (supplied)

connector

Analog connection

Plug the power cord into a power outlet and the Power connector on the monitor.

3

Adjusting the Screen Angle

Tilt and swivel the screen to the best condition for working.