Changhong MRF-410: USE

18

EN

USE

SWITCHING ON

• Prior  to  the  first  use,  thoroughly 

clean the refrigerator with a soap 

solution and rinse it well with plenty 

of water, then wipe dry.

NOTE

Only wipe refrigerator’s electrical parts 

with a dry cloth.

• Use the 

1

, “minus” and “plus” but-

tons to set the required tempera-

ture. This will start the compressor 

and a bulb inside the refrigerator.

• Open the refrigerator after 30 min-

utes. If the refrigerator’s tempera-

ture is notably lower, the refrigera-

tor is operating properly. After the 

refrigerator has been on for some 

time, the temperature regulator will 

automatically set the temperature 

within prescribed limits.

ELECTRONIC PROGRAMMER 

Logic control

Button 

2

,

 MENU

• This button is used to select func-

tions. Press the button to switch to 

the next function. The preset order 

is as follows: “set temperature in 

the  refrigerator”→”set  temperature 

in  the  freezer”→”set  to  “vacation” 

mode→”switch  off  cooling”.  Press 

the button again to return to the first 

function (“set temperature in the re-

frigerator”). 

Buttons 

1

,

 +

, 

-

• If  a  2-digit  number  flashes  on  the 

display, the 

2

 buttons can be used 

to increase or decrease the value 

by 1 unit each. This corresponds to 

a temperature change of 1 degree 

Centigrade.

2

1

3