Cambridge Audio 80 Series: 540C/640C V2.0 Compact disc player

540C/640C V2.0 Compact disc player: Cambridge Audio 80 Series

540C/640C V2.0 Compact disc player

Using

the

Remain

function

6. Press Play. The programmed tracks will play.

1. Ensure that the disc is playing.

7. You can use the Skip and Search functions on your remote control to

move through your programmed selection in the same way as normal

2. Press the Remain button on the remote control once to display the

playback.

time remaining on the track playing.

8. Pressing Stop once will stop play and pressing Stop twice at any time

3. Press Remain a second time to show remaining number of tracks

will wipe the program and return the player to stopped mode.

and total disc time remaining.

4. Press Remain again to return to normal play mode.

Using

the

Space

function

1. Ensure that a disc is loaded. The player can be in Standby mode or

playing.

2. Press Space on the remote control. ‘Space’ will appear on the display

and a four second gap will be put between each track played.

Programming

disc

play

1. Ensure that a disc is loaded and the player is in Standby mode.

2. Press Program on the remote control. The Program set-up will appear

in the display.

3. Using the Skip/Scan (Skip on the remote) buttons, skip to the track

number that you want to program as your first track.

4. Press Program. The desired track is now entered and the program

number increases by one.

5. Repeat steps three and four until all your desired tracks are entered.

Azur compact disc player 11

CUSTOM INSTALLATION (C.I.) USE

TROUBLESHOOTING

The 540C V2.0 and 640C V2.0 feature a Control Bus input/output that

There

is

no

power

allow un-modulated remote control commands (positive logic, TTL level)

to be received electrically by the unit and looped to another unit if

Ensure the AC power cord is connected securely.

desired. These control commands are typically generated by custom

Ensure the plug is fully inserted into the wall socket and is switched on.

installation (multi-room) systems or remote IR receiver systems.

Check fuse in the mains plug or adaptor.

An IR Emitter Input is also provided that allows modulated IR remote

control commands to be received electrically by the unit. Commands on

The

player

will

not

read

the

disc

this input operate the unit only and are not looped out demodulated on

Check the disc is not loaded upside down.

the Control Bus Output.

Check that the disc is not too scratched or dirty.

This feature is useful for multi-room systems (such as the Cambridge

Audio Incognito multi-room system) which feature routed I.R. emitter

outputs. Instead of using window emitters stuck over the CD players

There

is

no

sound

front panel IR receiver, a mono 3.5mm mini-jack to 3.5mm mini-jack

Ensure that the amplifier is set correctly.

lead can be used for a more reliable electrical connection.

Check that the interconnects are inserted correctly.

In addition the units feature 'direct' IR/Control codes as well as toggle

codes for many of their features to simplify programming custom

The

disc

is

skipping

installation systems. Special direct On / Off commands can be accessed

on the supplied remote control for teaching into C.I. systems as follows:

Check that the disc is not too scratched or dirty.

1. Press and hold the Standby button. The remote first generates it's

Ensure the player is on a firm surface and not subject to vibrations.

standby (toggle) command. Keep the button held down, after 12

seconds a CD player “On” command will be generated. If the button

There

is

a

hum

coming

from

the

speaker

is kept held down for a further 12 seconds, a CD player “Off”

command is generated.

Ensure that all cable connections are secure.

A full code table for this product is available on the Cambridge Audio

website at

www.cambridge-aaudio.com

.

The

remote

handset

will

not

function

Check that the batteries have not expired.

Ensure that nothing is blocking the remote sensor.

12 Azur compact disc player

Оглавление