Cambridge Audio 80 Series: 540C/640C V2.0 Compact disc player

540C/640C V2.0 Compact disc player

IMPORTANT SAFETY INSTRUCTIONS

Please take a moment to read these notes before installing your Azur CD

To clean the unit, wipe its case with a moist, lint-free cloth. Do not use

player, they will enable you to get the best performance and prolong the

any cleaning fluids containing alcohol, ammonia or abrasives. Do not

life of the product. We advise you follow all instructions, heed all

spray an aerosol at or near your CD player.

warnings and keep the instructions for future reference.

Ensure that small objects do not fall through any ventilation grille. If this

The unit is of Class 1 construction and must be connected to a Mains

happens, switch off immediately, disconnect from the mains supply and

socket outlet with a protective earthing connection.

contact your dealer for advice.

Do not defeat the safety purpose of the polarized or grounding-type plug.

Do not route the power cable so that it can be walked upon or damaged

A polarized plug has two blades with one wider than the other. A

by other items near it.

grounding type plug has two blades and a third grounding prong. The

If you do not intend to use this unit for a long period, switch it to Standby

wide blade or the third prong are provided for your safety. If the provided

and unplug it from the mains socket. Also unplug the unit during

plug does not fit into your outlet, consult an electrician for replacement

lightning storms.

of the obsolete outlet.

Refer all servicing to qualified service personnel. Servicing is required

The unit must be installed in a manner that makes disconnection of the

when the unit has been damaged in any way, such as a damaged power-

mains plug from the mains socket outlet (or appliance connector from

supply cord or plug, liquid has been spilled or objects have fallen into the

the rear of the unit) possible.

unit, the unit has been exposed to rain or moisture, does not operate

This unit must be installed on a sturdy, level surface.

normally, or has been dropped.

The unit requires ventilation. Do not situate it on a rug or other soft

If you have checked the Troubleshooting guide in the manual with no

surface and do not obstruct any air inlets or outlet grilles.

improvement, do not attempt to repair, disassemble or reconstruct the

unit. A serious electric shock could result if this precautionary measure

Do not place in a sealed area such as a bookcase or in a cabinet. Any

is ignored.

space open at the back (such as a dedicated equipment rack) is fine

however.

Important

Note

Do not install near any heat sources such as radiators, heat registers,

stoves, or other apparatus (including amplifiers) that produce heat.

This unit has been designed to play compact

discs, recordable CDs and rewritable CDs bearing

WARNING - To reduce the risk of fire or electric shock, do not expose this

the identification logo shown here. No other discs

unit to rain or moisture. This unit must not be exposed to dripping or

can be used.

splashing water or other liquids. No objects filled with liquid, such as

vases, shall be placed on the unit. In the event, switch off immediately,

disconnect from the mains supply and contact your dealer for advice.

Azur compact disc player 5

Mains

Voltage

Selector

Switch

Switches the mains voltage between 115V and 230V. For use by

installer/dealer only.

AC power

socket

Once you have completed all connections to the amplifier, plug the AC

power cable into an appropriate mains socket. Your compact disc player

is now ready for use.

Power

On/Off

Switches the unit on and off.

Control

Bus

In - Allows un-modulated commands from multi-rooms systems or other

components to be received by the unit.

Out - Loop out for control bus commands to another unit.

6 Azur compact disc player

REAR PANEL CONNECTIONS

1

3 4 5 7 86

2

1

5

IR

(Infra

Red)

Emitter

In

Allows modulated IR commands from multi-room systems to be received by

the unit. Commands received here are not looped out of the Control Bus.

2

6

Line

Output

Use good quality interconnect cables from these sockets to any line level

input on your amplifier.

7

S/P

DIF

Co-aaxial

Digital

output

3

For input to a separate DAC or digital recording machine. To obtain best

results, use a high quality 75 ohm digital RCA interconnect cable (not

one designed for normal audio use).

4

8

Toslink

Optical

Digital

output

Use to connect to the input of a separate DAC or digital recording

machine. Use a high quality TOSLINK fibre optic interconnect cable

designed specifically for audio use.