Binatone TP-4050: MAINTENANCE AND CLEANING

MAINTENANCE AND CLEANING: Binatone TP-4050

Unlock the pump (6) by moving the manual pump lock lever

(7) to “Open”. Place a cup under the water supply port (6)

and push the pump button. Release the button when the cup

is filled up. Move the manual pump lock lever (7) to “Lock”.

11.To supply water, the “Cup switch” (9) can be used. Press the

valve with a cup and move the cup away when the required

amount of water is dispensed.

12.For water re-boiling, press the button “Boil”.

13.Before re-using the appliance, empty the water out - as water

can change its color and odor, and yellow spots could appear

on the heating element.

Attention: To fully pour water out from the bulb, do not

use button “Dispense”. Pour out water directly from

the internal bulb.

MAINTENANCE AND

CLEANING

1. Before cleaning or storing, disconnect the

appliance from the power supply and wait until

the appliance is completely cooled.

2. Push on the lid lock valve (4) with “arrow”

indication, pull the lid (3) up, and take off the lid

(3) from the appeliance.

3. To avoid electrical injuries, do not place the

casing (1) and power cable (11) in water. The

parts of the appliance as well as the internal bulb (2) can be

cleaned by using a damp lint free cloth.

4. Store the appliance only when completely dry.

USEFUL TIPS

In areas with high water hardness, scale must

be regularly removed from the appliance to keep

it in good operating condition, since an excessive

scale in the appliance could result in the appliance

mal-operation or failure. Frequency of de-scaling

depends on the tap water hardness in your region

and how often you use your thermopot. If water

in your house is hard, we recommend filtering it - this will decrease

the amount of deposited scale substantially.

Scale removal:

1. Cut a lemon in 4 parts, wrap in cheesecloth, and place in the

internal bulb (2).

2. Pour water in the appliance up to the maximum mark on the

indicator (9).

3. Boil the water and keep the appliance connected to the power

grid for one hour.

4. Pour out the water and remove scale with a soft cloth.

5. To neutralize lemon odor, pour clear water in the appliance

and boil it.

Anything else should be performed in authorized service cen-

8