ABUS TVAC710x0: General safety information: Safety information
General safety information: Safety information: ABUS TVAC710x0
Оглавление
- These user manual contains important information for installation and operation. This should be also noted when this product is passed on to a third party.Therefore look after these operating instructions for future reference!
- User guide
- Introduction
- Icon explanation Important safety advice The following safety information and hazard notes are not only intended to protect your health, but also to protect the device from damage. Please read the following points carefully: Avoid the following adverse conditions during operation:
- General safety information: Safety information
- Warnings Unpacking
- Table of contents
- 1. Intended use 2. Scope of delivery 3. Features and Functions 4. Description of the illuminators
- 5. Mounting / installation Installation example for installing the cable
- 6. Notes on using infrared illuminators 7. Maintenance and cleaning 7.1 Maintenance
- 7.2 Cleaning Wipe the product with a clean, dry cloth. If the device is very dirty, you can moisten the cloth with lukewarm water. 8. Disposal
- 9. Technical data Model
- Model
19
English
General safety information:
Never look directly into the infrared illuminator from a short distance (1 m). Do not use optical devices such as a magnifying glass
to look directly at the illuminator.
Do not leave packaging material lying around. Plastic bags, sheeting, polystyrene packaging, etc., can pose a danger to children if
played with.
Do not insert any objects into the device through the openings.
Only use replacement devices and accessories that are approved by the manufacturer. Do not connect any non-compatible
products.
Please pay attention to the safety information and user guides for the other connected devices.
Check the device for damage before commissioning. Do not put the device into operation if you detect any damage.
Adhere to the operating voltage limits specified in the technical data. Higher voltages could destroy the device and pose a health
risk (electric shock).
Safety information
1. Power supply: 12 - 24 VAC / VDC
Only operate this device on a power source which supplies the power specified on the type plate. If you are unsure which voltage is
supplied at the installation location, contact your power supply company. Disconnect the device from the power supply before carrying
out maintenance or installation work.
2. Overloading
Avoid overloading electrical sockets, extension cables, and adapters, as this can result in fires or electric shocks.
3. Cleaning
Only use a damp cloth to clean the device. Do not use corrosive cleaning materials.
Disconnect the device from the power supply while doing so.
