ABUS TVAC710x0: 1. Intended use 2. Scope of delivery 3. Features and Functions 4. Description of the illuminators
1. Intended use 2. Scope of delivery 3. Features and Functions 4. Description of the illuminators: ABUS TVAC710x0
Оглавление
- These user manual contains important information for installation and operation. This should be also noted when this product is passed on to a third party.Therefore look after these operating instructions for future reference!
- User guide
- Introduction
- Icon explanation Important safety advice The following safety information and hazard notes are not only intended to protect your health, but also to protect the device from damage. Please read the following points carefully: Avoid the following adverse conditions during operation:
- General safety information: Safety information
- Warnings Unpacking
- Table of contents
- 1. Intended use 2. Scope of delivery 3. Features and Functions 4. Description of the illuminators
- 5. Mounting / installation Installation example for installing the cable
- 6. Notes on using infrared illuminators 7. Maintenance and cleaning 7.1 Maintenance
- 7.2 Cleaning Wipe the product with a clean, dry cloth. If the device is very dirty, you can moisten the cloth with lukewarm water. 8. Disposal
- 9. Technical data Model
- Model
22
English
1. Intended use
The infrared/white light illuminators are suitable for setting up video surveillance equipment. Thanks to their IP66 protection class, they
can be used both inside and outside. The variable 12–24 VAC / VDC voltage input ensures a comprehensive power supply. The photo
sensor ensures that the illuminator switches on and switches off automatically. The illuminator can be used with a camera for video
surveillance.
For a detailed description of functions, refer to Section 3, “Features and functions”.
2. Scope of delivery
Illuminator
User guide
3. Features and Functions
Aluminium housing
¼" thread
Variable voltage input
Protection class IP 66
4. Description of the illuminators
Photo sensor
sensor
