Tanita BC-587: PREPARATIONS BEFORE USE

PREPARATIONS BEFORE USE

Inserting the Batteries

Open the battery cover on the back of the measuring platform. Insert the supplied AA-

batteries as indicated.

Note:

Be sure that the polarity of the batteries is set properly. If the batteries are incorrectly

positioned the fluid may leak and damage floors. If you do not intend to use this

unit for a long period of time, it is advisable to remove the batteries before storage.

Please note that the included batteries from factory may have decreased energy levels over

time.

Positioning the Monitor

Place the measuring platform on a hard, flat surface where there is minimal vibration to

ensure safe and accurate measurement.

Note: To avoid possible injury, do not step on the edge of the platform.

Handling Tips

This monitor is a precision instrument utilizing state-of-the-art technology.

To keep the unit in the best condition, follow these instructions carefully:

•

Do not attempt to disassemble the measuring platform.

• Store the unit horizontally, and place it so that the buttons will not be pressed accidentally.

• Avoid excessive impact or vibration to the unit.

• Place the unit in an area free from direct sunlight, heating equipment, high humidity, or extreme temperature change.

• Never submerge in water. Use alcohol to clean the electrodes and glass cleaner (applied to a cloth first) to keep them shiny; avoid

soaps.

•

Do not step on the platform when wet.

• Do not drop any objects onto the platform.

GETTING ACCURATE READINGS

To ensure accuracy, readings should be taken without clothing and under consistent

conditions of hydration. If you do not undress, always remove your socks or

stockings, and be sure the soles of your feet are clean before stepping on the

measuring platform.

Be sure that your heels are correctly aligned with the electrodes on the measuring

platform. Don’t worry if your feet appear too large for the unit - accurate readings

can still be obtained if your toes overhang the platform.

Heels centered on

Toes may overhang

It is best to take readings at the same time of day. Try to wait about three hours after

electrodes

measuring platform

rising, eating, or hard exercise before taking measurements.

Note:

An accurate reading will not be

While readings taken under other conditions may not have the same absolute

possible if the soles of your feet are

values, they are accurate for determining the percentage of change as long as the

not clean, or if your knees are bent or

readings are taken in a consistent manner. To monitor progress, compare weight

you are in a sitting position.

and body fat percentage taken under the same conditions over a period of time.

AUTOMATIC SHUT-DOWN FUNCTION

The automatic shut-down function shuts off the power automatically in the following cases:

• If you interrupt the measurement process. The power will shut down automatically within 10 to 20 seconds, depending upon the

type of operation.

•

If an extreme weight is applied to the platform.

• During programming, if you do not touch any of the keys or buttons within 60 seconds.*

• After you have completed the measuring process.

*Note: If the power shuts off automatically, repeat the steps from “Setting and Storing Personal Data in Memory” (p.3).

2