Eneo NXD-980IR37P: DE

Operation

The Network Camera can be used with Windows operating system and

browsers. The recommended browsers are Internet Explorer, Safari, Firefox,

Opera and Google Chrome with Windows.

Access from a browser

DE

1. Start a browser. (Internet Explorer) will be used in this example.

EN

2. Enter the IP address or host name of the Network Camera in the Loca-

tion/Address field of your browser.

FR

3. You can see a starting page. Click Live View or Setup to enter web

page.

PL

RU

4. The network camera’s Live View page appears in your browser.

19

Access from the internet

Access from the internet once connected, the Network Camera is accessible

on your local network (LAN). To access the network camera from the Internet

you must configure your broadband router to allow incoming data traffic to

the network camera. To do this, enable the NAT-traversal feature, which will

attempt to automatically configure the router to allow access to the network

camera. This is enabled from Setup > System > Network > NAT. For more

information, please see “3.5.5 System>Network>NAT” of User’s Manual.

Setting the admin password over a secure connection

To gain access to the product, the password for the default administrator

user must be set. This is done in the “Admin Password” dialog, which is

displayed when the network camera is accessed for the setup at the first

time. Enter your admin name and password, set by the administrator.

NOTE: The default administrator username and password is

“admin”. If the password is lost, the Network Camera must be

reset to the factory default settings. See “Resetting to the Factory

Default Settings”.

20