Electrolux ENG2913AOW: 6. WHAT TO DO IF…

30

www.electrolux.com

6. WHAT TO DO IF…

WARNING!

Before troubleshooting, discon-

nect the mains plug from the

mains socket.

Only a qualified electrician or com-

petent person must do the trou-

bleshooting that is not in this man-

ual.

Problem Possible cause Solution

The appliance does

The appliance is switched

Switch on the appliance.

not operate. The

off.

lamp does not oper-

ate.

The mains plug is not con-

Connect the mains plug to

nected to the mains sock-

the mains socket correctly.

et correctly.

The appliance has no

Connect a different electri-

power. There is no voltage

cal appliance to the mains

in the mains socket.

socket.

Contact a qualified electri-

cian.

The buzzer sounds. The temperature in the

Refer to "Excessive Tem-

freezer is too high.

perature Alarm"

The lamp does not

The lamp is in stand-by. Close and open the door.

work.

The lamp is defective. Refer to "Replacing the

lamp".

The compressor op-

The temperature is not set

Set a higher temperature.

erates continually.

correctly.

The door is not closed

Refer to "Closing the door".

correctly.

The door has been

Do not keep the door open

opened too frequently.

longer than necessary.

The food temperature is

Let the food temperature

too high.

decrease to room tempera-

ture before storage.

The room temperature is

Decrease the room temper-

too high.

ature.

Water flows on the

During the automatic de-

This is correct.

rear plate of the re-

frosting process, frost de-

frigerator.

frosts on the rear plate.

Water flows on the

The melting water outlet

Attach the melting water

ground.

does not flow in the evap-

outlet to the evaporative

orative tray above the

tray.

compressor.