Eizo FlexScan M1900: Connecting Cables

TroubleshootingSetting/AdjustmentPrior to use Installation

Connecting Cables

Attention

English

• When replacing the current monitor with an M1700/M1900 monitor, be sure to change the PC settings for

resolution and vertical frequency to those which are available for the M1700/M1900 monitor referring to

the resolution table (back of cover page) before connecting the PC.

NOTE

• To use speaker, connect a stereo mini-jack cable to the Audio output terminal on a PC or CD player.

• When connecting two PCs to the monitor, refer to the User’ s Manual on the CD-ROM.

Check that the monitor and the PC are powered off.

1

Connect the monitor to the PC with a signal cable that matches the connectors.

2

After connecting the cable connectors, tighten the screws of the connectors to secure the coupling.

CD player etc

Audio output terminal

Connectors on the

Connectors on the

(Stereo mini-jack)

PC

monitor

Audio output terminal

External line in

(Stereo mini-jack)

Stereo Mini-jack cable (supplied)

(Stereo mini-jack)

DVI-I connector

DVI-D connector

Signal cable FD-C39 (supplied)

Digital connection

D-sub mini 15-pin

connector

Signal cable MD-C87 (supplied)

D-sub mini 15-pin

connector

Analog connection

D-sub 15-pin

Macintosh Adaptor (optional) and

connector

signal cable MD-C87 (supplied)

Analog connection

Plug the power cord into a power outlet and the Power connector on the monitor.

3

Adjusting Screen Height and Angle

Adjust the screen height, tilt and swivel the screen to the best condition for working.

3