Eizo FlexScan M1700: Displaying Screen

Prior to use Installation TroubleshootingSetting/Adjustment

Displaying Screen

Press to turn on the monitor.

1

English

Turn on the PC.

2

The monitor’s Power indicator lights up blue and the screen image appears.

When using analog input signals, perform the Auto Adjustment function. (Refer

3

to “Performing Auto Adjustment function” below.)

The Auto Adjustment function is not necessary when digital signals are input because images are

displayed correctly based on the preset data of the monitor.

Attention

• Turn off the monitor and PC after using them.

• For the maximum power saving, it is recommended that the Power button be turned off. Unplugging the

power cord completely shuts off power supply to the monitor.

Performing Auto Adjustment Function (Analog input only)

When analog signals are input, the Auto Adjustment function enables the automatic adjustment of clock, phase, screen

position, and resolution.

For details of the Auto Adjustment function, refer to the User’s Manual on the CD-ROM.

Message window

Press .

1

A message window appears.

Press again while the message is displayed.

2

The Auto Adjustment function is activated and clock, phase,

screen position, and resolution are adjusted automatically.

Attention

• The Auto Adjustment function works correctly when an image is fully displayed over the display area of a

Macintosh or Windows PC screen.

It does not work properly when an image is displayed only on a part of the screen (DOS prompt window,

for example) or when a black background (wallpaper, etc.) is in use.

• The Auto Adjustment function may not work properly with some graphics boards.

Adjusting Speaker Volume

Press the or button.

Volume adjustment window

1

The volume adjustment window appears.

Change the speaker volume with the to

2

decrease or the

to increase.

Press at the desired volume.

3

To mute the sound, press the or while the volume adjustment menu is displayed.

To cancel muting, press the or button.

4