Whirlpool ARG340A+: MAINTENANCE AND CLEANING REPLACING THE BULB TROUBLESHOOTING GUIDE

1. Keep both doors of the appliance closed. This

freezer is not available and, likewise, no artificial

will allow the stored food to stay cold as long as

ice packs are available, try to use up the food,

possible.

which is more easily perishable.

2. Empty the ice bucket.

For power failures lasting more than 24 hours.

1. Empty the freezer compartment and arrange

the food in a portable freezer. If this type of

MAINTENANCE AND CLEANING

Before any cleaning or maintenance operation, unplug the appliance from the mains or disconnect the

electrical power supply.

Periodically clean the appliance with a cloth and a solution of lukewarm water and neutral detergent

specifically for refrigerator interiors.

Never use detergents or abrasives. Never clean refrigerator parts with flammable fluids. The fumes can

create a fire hazard or explosion.

Clean the outside of the appliance and the door seal with a damp cloth and dry with a soft cloth.

Do not use steam cleaners.

Clean the condenser using a vacuum cleaner, proceeding as follows: remove the front plinth (see

installation manual) and proceed to clean the condenser.

Important:

- The buttons and control panel display must not be cleaned with alcohol or alcohol-derived substances,

but with a dry cloth.

- The refrigeration system pipes are located near the defrost pan and can become hot. Periodically clean

them with a vacuum cleaner.

REPLACING THE BULB

Always disconnect the appliance from the power supply before replacing any light bulbs.

How to replace the refrigerator compartment bulb.

1. In some models a special bulb is used

2. The bulb should not exceed 15W

3. Bulb change instruction is put in the chart (PRODUCT SHEET)

TROUBLESHOOTING GUIDE

Before contacting After-sales Service…

- Separating and avoiding contact between the

Performance problems often result from little

appliance and furniture.

things you can find and fix yourself without tools of

- Checking if the internal components are

any kind.

correctly placed.

- Checking if bottles and containers are not in

Noises coming from your appliances are

contact with each other.

normal since it has a number of fans and

Some of the functional noises you might hear:

engines to regulate performances that switch

A hissing sound when switching on the

on and off automatically.

appliance for the first time or after a long

Some of the functional noises can be reduced

pause.

through

A gurgling sound when refrigerant fluid enters

- Levelling the appliance and installing it on an

into the pipes.

even surface

7