Whirlpool ARG340A+: AFTER-SALES SERVICE ELECTRICAL CONNECTION FOR GREAT BRITAIN AND IRELAND ONLY

AFTER-SALES SERVICE

Before contacting After-Sales Service:

• the Service number (the number after the word

Switch the appliance on again to see if the problem

SERVICE on the data plate on the inside of the

has been solved. If it has not, disconnect the

appliance),

appliance from the power supply and wait for about

• your full address,

an hour before switching on again.

• your telephone number and area code.

If, after performing the checks described in the

Troubleshooting Guide and switching the appliance

on again, your appliance still does not work

properly, contact the After-sales Service, explain

the problem.

Note:

Specify:

The direction of door opening can be changed. If

• the model and appliance serial number (stated

this operation is performed by After-sales Service it

on the rating plate),

is not covered by the warranty.

• the nature of the problem,

ELECTRICAL CONNECTION FOR GREAT

BRITAIN AND IRELAND ONLY

Warning - this appliance must be earthed

Fuse replacement

If the mains lead of this appliance is fitted with a BS 1363A

13amp fused plug, to change a fuse in this type of plug use an

A.S.T.A. approved fuse to BS 1362 type and proceed as

follows:

1. Remove the fuse cover (A) and fuse (B).

2. Fit replacement 13A fuse into fuse cover.

3. Refit both into plug.

Important:

The fuse cover must be refitted when changing a fuse and if the fuse cover is lost the plug must not be used

until a correct replacement is fitted.

Correct replacement are identified by the colour insert or the colour embossed in words on the base of

the plug.

Replacement fuse covers are available from your local electrical store.

For the Republic of Ireland only

The information given in respect of Great Britain will frequently apply, but a third type of plug and socket is

also used, the 2-pin, side earth type.

Socket outlet / plug (valid for both countries)

If the fitted plug is not suitable for your socket outlet, please contact After-sales Service for further

instruction. Please do not attempt to change plug yourself. This procedure needs to be carried out by a

qualified technician in compliance with the manufactures instructions and current standard safety

regulations.

9