Fieldmann FZP 2001-E: 4. GENERAL INSTRUCTIONS BEFORE CHAIN SAW USE

13

EN Machine description and content of delivery | General instructions before chain saw use

Content of delivery

Take the machine out of package and check whether the following parts are complete:

ATTENTION! Sharp guides!

Chain saw

Guide

Chain

Guide guard

Oil tank

Operating instructions

If any parts are missing or damaged, please refer to the dealer you purchased the machine from.

4. GENERAL INSTRUCTIONS BEFORE

CHAIN SAW USE

ATTENTION! Never modify the chain saw. Use just original accessories and spare parts.

The manufacturer is not responsible for the damages caused by machine modification

or in the instances when the safety instructions for chain saw operating included in this

operating manual are not observed. Unauthorized modifications or non-original spare parts

can cause serious or fatal injury.

Read carefully the operating instructions.

Always follow „safety instructions».

Check proper assembly and adjustment of chain and guide.

Do not start cutting until sufficient amount of oil gets into the chain.

Improper tightening of chain increases the wear of chain, chain cover and guide and can

cause serious damage of these parts.

Improper manipulation with extension cord can lead to serious motor damage.

ATTENTION!

- Do not use a coiled extension cord.

2

- Minimum conductor cross-section: 1 mm

- Maximum cable length: 30m

- Voltage: 230 V-240V

OPERATING INSTRUCTIONSELECTRICAL CHAIN SAW