Zyxel NWA-3160: " The wireless stations and the ZyXEL Device must use the same

ENGLISH

Configure Wireless Settings

1 Click WIRELESS in the

navigation panel. A

screen similar to the

following appears. Not all

fields are available in all

models.

" The wireless stations and the ZyXEL Device must use the same

SSID, channel ID and encryption settings for wireless

communication.

Operating Mode: Ensure that Access Point mode is selected.

802.11 Mode: Select the wireless standard you want your network to use. If you are

not sure which to select, select 802.11b+g.

Channel ID: Select the wireless channel you want your network to use. To have the

ZyXEL Device automatically select a channel, click Scan instead.

SSID Profile: Select the SSID profile you want to configure for network access from

the drop-down list box. This example uses the SSID03 profile.

2 Click Apply to save your settings.

8

ENGLISH

3 Click the SSID tab. The

following screen appears.

Ensure the settings for

SSID03 are at their default

values.

The default SSID (the

name of the network) is

ZyXEL03, its default

Security setting is

Security01. Layer 2

Isolation and MAC Filter

are set to Disable by

default.

If you want to change the

SSID profile’s settings,

select SSID03 and click

Edit.

4 Click the Security tab.

Ensure that Security01 is

selected and click Edit.

If you don’t configure

wireless security, then

anyone can access your

network.

9