Eizo FlexScan S1910: Connecting Cables

TroubleshootingSetting/AdjustmentPrior to use Installation

Connecting Cables

Attention

English

• When replacing the current monitor with an S1910 monitor, be sure to change the PC settings for

resolution and vertical frequency to those which are available for the S1910 monitor referring to the

resolution table (back of cover page) before connecting the PC.

NOTE

• When connecting two PCs to the monitor, refer to the User’s Manual on the CD-ROM.

Check that the monitor and the PC are powered off.

1

Connect the monitor to the PC with a signal cable that matches the connectors.

2

After connecting the cable connectors, tighten the screws of the connectors to secure the coupling.

Connectors on the

Connectors on the

PC

monitor

DVI-I connector

Signal cable FD-C39 (supplied)

DVI-D connector

Digital connection

D-sub mini 15-pin

connector

Signal cable MD-C87 (supplied)

D-sub mini 15-pin

Analog connection

connector

D-sub 15-pin

Macintosh Adapter (optional) and

connector

signal cable MD-C87 (supplied)

Analog connection

Plug the power cord into a power outlet and the Power connector on the monitor.

3

Adjusting Screen Height and Angle

Adjust the screen height, tilt and swivel the screen to the best condition for working.

3