Ardo A1000X: PREPARING THE MACHINE FOR USE How to repack the machine

✽ Under no circumstances should any

✽ Repairs to the washing machine must

repairs to the machine be attempted

only be carried out persons authorised

by unqualified persons as this could

to do so by the service centres. Only

result in serious damage and will

original spare parts may be used for

invalidate the guarantee.

repairs.

PREPARING THE MACHINE FOR USE

How to unpack and remove the protection devices

➘ Put the washing machine in its place of installation and remove the external packag-

ing.

➘ Unscrew the 4 protection screws anchoring the mobile parts marked with the letters A-B-

C-D in figures 1 and 2, and then remove them together with the plastic spacers H [fig. 2].

Insert the plugs supplied in the holes left by the screws.

➘ If the spacers remain in the machine, they can be removed by unscrewing the screws

indicated with the letter L in figure 2, and then finish by screwing the panel back in

place. The screws and spacers must be kept in a safe place for re-use when the

machine is moved in the future.

The spacers must be removed, in that if they are left in position they may cause

damage to the equipment.

➘ Lift the washing machine and remove the polystyrene base.

How to repack the machine

a) unscrew the 8 screws marked L from the rear panel and remove the panel.

b) insert the locking screws A-B-C-D in their respective holes.

c) insert the 4 spacers onto screws A-B-C-D of the panel.

d) locate the rear panel on the machine, ensure it is positioned correctly and then

tighten screws A-B-C-D.

e) replace and tighten the 8 rear panel screws marked L.

SM1

3