Labconco VACUUBRAND Diaphragm Pump 7393000: Accessories

page 48 of 74

Accessories

Digital vacuum gauge DVR 2 .....................682902

Level sensor for catchpots ...........................................................................699908

Vacuum hose (caoutchouc) I.D. 3/8” (10 mm ID) ......................................686002

Silencer for hose nozzle 3/8” (DN 10 mm) ..................................................636588

Attention: Dust-laden gases, deposits and condensed solvent vapor can restrict

air ow out the silencer. The resultant back pressure can lead to damage of pump

bearings, diaphragms, and valves. Under those conditions, a silencer must not be

used.

Check valve (apper valve) .......................................................................639683

(Simultaneous operation of two systems at different pressure levels,

stainless steel/FFKM, leak rate < 1.6*10-3 Torr*cfm

for pressure differences > 375 Torr (500 mbar))

Upgrade possibilities for NT vacuum systems:

Upgrade kit SYNCHRO .............................................................................. 699920

to two inlets (valve block; replaces distribution head)

Adapter G 1/4 thread to PTFE tubing*, .....................................................677060

for inlet at valve block (SYNCHRO)

Small ange KF DN 16 ...............................................................................662593

for assembly at inlet of valve block (SYNCHRO)

Seal ring for small ange KF DN 16 (662593) ........................................... 3120565

Hose nozzle for tubing I.D. 1/4” / 3/8” (DN 6/10 mm), ............................... 642470

for inlet at valve block (SYNCHRO)

Modication kit for small ange KF DN 16 ................................................699939

at inlet of distribution head

Hose nozzle for tubing I.D. 1/4” / 3/8” (DN 6/10 mm), ............................... 636635

for inlet at distribution head

Elbow piece (90°) for PTFE tubing* ...........................................................637873

for assembly at inlet of distribution head

Adapter for gas ballast connection ...........................................................636193

Via small ange KF DN 16

Blind ange (C1) .........................................................................................677136

for assembly at valve block or distribution head

page 49 of 74

Flow control diaphragm valve (C2) ...........................................................677137

for assembly at valve block or distribution head

Solenoid operated valve (C3-B) .................................................................636668

for assembly at valve block or distribution head

Manometer module (C5) ............................................................................ 677100

for assembly at valve block or distribution head

Controller CVC 3000 ...................................................................................683160

In-line valve VV-B 6C ..................................................................................674291

®

VACUU•LAN

Mini-Network with three VCL 01 modules .........................2614455

Vacuum adjustment device with manometer .............................................. 696840

Ways to connect NT chemistry diaphragm pumps:

Small ange KF DN 16, ..............................................................................677058

with hose - for installation at hose nozzle

Small ange KF DN 16, ..............................................................................699918

for assembly directly at the valve head

(at inlet of ME 4C NT / ME 8C NT / MD 4C NT; at outlet of ME 4C NT / MZ 2C NT)

Small ange KF DN 16, ...............................................................................699919

for assembly directly at the valve head (at outlet of ME 8C NT / MD 4C NT)

Adapter hose nozzle DN 10 to hose nozzle 1/2” .......................................636002

Adapter to PTFE tubing*, ............................................................................636274

for assembly directly at the valve head (at inlet of ME 4C NT / ME 8C NT / MD 4C

NT; at outlet of ME 4C NT / MZ 2C NT)

Adapter to PTFE tubing*, ............................................................................636275

for assembly directly at the valve head (at inlet of MZ 2C NT;

at outlet of ME 8C NT / MD 4C NT)

Elbow connecting piece (90°) for PTFE tubing* .......................................638434

T-piece for PTFE tubing* ............................................................................. 638435

PTFE tubing* (sold by meter) ...................................................................... 638644

* PTFE tubing DN 10/8 mm

®

VACUU•LAN

networks are engineered to perform to specication when installed

®

with PTFE tubing, DN 10/8 mm. All VACUU•LAN

modules, pumps and connectors

are designed for compatibility with this tubing.

Spare parts:

Catchpot 0.52 qt (500 ml), coated ................................................................638497

For additional accessories such as vacuum valves, small-ange components, vac-

uum gauges or vacuum controllers refer to www.vacuubrand.com