Eizo FlexScan L568: Connecting Cables

TroubleshootingSetting/AdjustmentPrior to use Installation

Connecting Cables

Attention

English

• When replacing the current monitor with an L568/L768 monitor, be sure to change the PC settings for

resolution and vertical frequency to those which are available for the L568/L768 monitor referring to the

resolution table (back of cover page) before connecting the PC.

NOTE

• When connecting two PCs to the monitor, refer to the User’s Manual on the CD-ROM.

Check that the monitor and the PC are powered off.

1

Connect the monitor to the PC with a signal cable that matches the connectors.

2

After connecting the cable connectors, tighten the screws of the connectors to secure the coupling.

Connectors on the

Connectors on the

PC

monitor

DVI-D connector

Signal cable FD-C35/C39 (supplied)

DVI-D connector

Digital connection

D-sub mini 15-pin

connector

Signal cable MD-C87 (supplied)

D-sub mini 15-pin

Analog connection

connector

D-sub 15-pin

Macintosh Adapter (optional) and

connector

signal cable MD-C87 (supplied)

Analog connection

Plug the power cord into a power outlet and the Power connector on the monitor.

3

Adjusting Screen Height and Angle

Adjust the screen height, tilt and swivel the screen to the best condition for working.

3