Whirlpool AKP 449 IX: MAINTENANCE REMOVING THE DOOR MOVING THE TOP HEATING ELEMENT (SOME MODELS ONLY)
MAINTENANCE REMOVING THE DOOR MOVING THE TOP HEATING ELEMENT (SOME MODELS ONLY): Whirlpool AKP 449 IX
Table of contents
- IMPORTANT SAFETY INSTRUCTIONS YOUR SAFETY AND THAT OF OTHERS IS VERY IMPORTANT Scrapping of household appliances
- INSTALLATION ELECTRICAL CONNECTION GENERAL RECOMMENDATIONS SAFEGUARDING THE ENVIRONMENT DECLARATION OF CONFORMITY TROUBLESHOOTING GUIDE
- AFTER-SALES SERVICE CLEANING
- MAINTENANCE REMOVING THE DOOR MOVING THE TOP HEATING ELEMENT (SOME MODELS ONLY)
- REPLACING THE OVEN LAMP INSTRUCTIONS FOR OVEN USE
- COMPATIBLE ACCESSORIES
- CONTROL PANEL DESCRIPTION HOW TO OPERATE THE OVEN FUNCTION DESCRIPTION TABLE
- COOKING TABLE Recipe Function Preheating Shelf
- Recipe Function Preheating Shelf
- RECOMMENDED USE AND TIPS
MAINTENANCE
- Use protective gloves.
WARNING
- Ensure the oven is cold before carrying out the following operations.
- Disconnect power before servicing.
REMOVING THE DOOR
To remove the door:
1. Open the door fully.
2. Lift the catches and push them forwards as far as they will go (Fig. 1).
3. Close the door as far as it will go (A), lift it up (B) and turn it (C) until it is released (D) (Fig. 2).
To refit the door:
1. Insert the hinges in their seats.
2. Open the door fully.
3. Lower the two catches.
4. Close the door.
Fig. 1 Fig. 2
MOVING THE TOP HEATING ELEMENT (SOME MODELS ONLY)
1. Remove the side accessory holder grilles (Fig. 3).
2. Pull the heating element out a little (Fig. 4) and lower it (Fig. 5).
3. To reposition the heating element, lift it up, pulling it slightly towards you, be sure it comes to rest on the lateral supports.
Fig. 3 Fig. 4 Fig. 5
GB4
