LED LENSER SEO™ 3: LED LENSER® * SEO 3
LED LENSER® * SEO 3: LED LENSER SEO™ 3

LED LENSER® * SEO 3
SEO 3 blinks in the Light Function Signal (slow
to be closed again.
even flashing).
The Light Function Signal is the last Light
Note – Please ensure that there is no short-
Function that can be used in the Light Program
circuit at the contacts of the batteries. The
“Red Night Vision” so additional switching turns
contacts of the batteries may not be touched
SEO 3 off and the circle starts again with the
with moist or metallic objects.
Light Function Power when you press the switch
button again.
10. Headband
So the Light Functions are in a loop. But please
If the headband is not already connected to the
note that you turn off the head lamp by every
lamp unit, proceed as follows.
switching if since the previous switching more
Thread the end of headband with the narrow
than 2 seconds have elapsed. For example in
plastic part from the front through the eyelet
case you let pass more than 2 seconds after
on the left side of the head lamp housing.
you turned the Light Function Power on the next
Note the orientation of the lettering on the
switching will not change to head lamp to Light
headband. Run the headband then over the
Function Signal but will turn the SEO 3 off.
cover of the battery box to the eyelet on the
other side of the battery box and run it through
6. “Transport Lock”
it to the front.
Under Point 5 it has been described how to
This end of the headband has got to be pulled
switch between the white and the red LED.
through the hole beside the clipper at the
This takes place when the SEO 3 is off and the
plastic part on the other side of the headband.
switch button is pressed only for approx. 2
This elongate hole has got 4 small bars
seconds. The head lamp will change from red
through which the narrow plastic part has to
to white or from white to red. But when the
be run from the side.
switch is pressed longer (approx. 5 seconds)
This allows that the complete end is pulled
until the light turns off you have enabled the
through this hole and both ends of the
“Transport Lock”. Then the SEO 3 can not be
headband are connected to each other.
turned on again but the red LED flashes for a
By using the eye of the clipper the SEO 3 can e.g.
short moment to indicate that this function is
attached to an ear of a belt or a backpack for
activated in case the switch button is pressed.
transportation.
The SEO 3 therefore cannot be switched on,
The third plastic component at the headband
either intentionally or unintentionally and
can be used to adjust the length of the
inadvertently consume energy.
headband in order to fit different head
Only when you hold the switch button pressed
circumferences.
for 5 seconds again this function (“Transport
Lock”) is deactivated again and the lamp is in
11. Rechargeable batteries / Accumulators
the Light Program White.
Non rechargeable batteries (e.g. Alkaline
batteries) are not allowed to be charged.
7. Reset function
Never use non rechargeable batteries and
If the used alkaline batteries are taken out the
accumulators together. Change always all
battery box you have "reset" the SEO 3. You
batteries / accumulators at the same time. Use
have thus reset two functions:
in the SEO 3 only Alkaline batteries AAA/LR03/
- The “Transport Lock” (s. Point 6) is deactivated
Micro (1.5 V DC) or NiMH-Accumulators AAA/
- The Light Program White (s. Point 5) is activated
LR03/Micro (1.2 V DC).
If you intend not to use the item for an
8. Use of rechargeable batteries
extended period, please take out the batteries
Only use 3 x Alkaline battery AAA/LR03/Micro
respectively the accumulators in order to avoid
(1.5 V DC) or 3 x NiMH-Accumulator AAA/LR03/
damage.
Micro (1.2 V DC) in your SEO 3. Please change
Discharged batteries (or accumulators – when
all alkaline batteries respectively rechargeable
they can’t be recharged any longer) have to be
batteries (i.e. accumulators) in time.
taken out of the product and properly disposed
The scope of delivery of the SEO 3 includes
with regards to the national laws.
alkaline batteries. This type of battery cannot
be charged resp. recharged.
In general, for the disposal of batteries as
well as particularly for Lithium batteries,
9. Changing of the batteries / accumulators
accumulators and accumulator packs, the
Prior to the change, please turn off the SEO 3.
applicable rule is that they may only be
On the wide side of the head lamp housing is
disposed of in discharged state and in a
the cover of the battery box. Nearby the switch
technically correct manner. Additionally before
button there is a plastic lip. If this lip is carefully
disposal it has to be ensured, by sticking non-
pressed a little with e.g. your thumb up a little,
conducting adhesive tape over the contacts
the battery box cover can be folded down by
that short-circuits are not possible.
using the small notches that are to the left and
Basically, the possibility of short-circuits of
the right of the switch button.
batteries and also accumulators must be
You can now remove the Alkaline batteries
eliminated and they may neither be opened,
respectively NiMH-Accumulator and insert new
nor enter the human body in any way, nor may
ones.
they be thrown into a fire.
During insertion, it is vital the batteries point
in the right direction. Therefore, pay attention
12. Cleaning
to the polarities (+ and -). Both in the battery
For cleaning, please use a dry, lint-free, clean cloth.
box and also on the batteries / accumulators.
If salt water is spilled on the head lamp, it must be
Otherwise, the hypothetical risk that batteries or
immediately entirely removed with such a cloth.
accumulators are damaged and may explode.
The headband can be washed in a washing machine
After replacing the cover of the battery box has
at 30 °C.
03

GB
13. Scope of delivery
as long as the information contained in this
The SEO 3 incl. headband is supplied with the
instruction manual is observed.
following accessories:
The aversion reactions are triggered by the
- Alkaline batteries AAA/LR03/Micro (1.5 V DC)
exposure and they are to mean all natural
- Operating manual
reactions that protect the eye from hazards
through optical radiation. This includes in
Additional accessories for the SEO 3 are being
particular conscious aversion reactions such
designed. You can get information on these
as eye or head movement (e.g. turning away).
additional accessories over and above the
supplied kit on our Internet page.
When using the product it is of particular
importance to bear in mind that the aversion
14. Caution
reactions of persons at whom the light is
Do not swallow any small parts or batteries
directed at may be weakened or completely
that are present. The products or parts thereof
suspended as a result of medication, drugs or
(including batteries) must be stored outside the
illness.
reach of children.
For reasons of safety and approval (CE), the
Because of the blinding effect of the product,
product must not be modified and/or changed.
improper use may lead to reversible, i.e.
The product is to be used exclusively as
temporary impairment of sight (physiological
battery powered lamp. If the SEO 3 is used
blinding) or afterimages, or it may trigger
for any other purpose, or used incorrectly, it
feeling unwell in the sense of feeling queasy
can get damaged and hazard-free use is not
and tired (physiological blinding). The intensity
guaranteed any more (danger from fire, short-
of the temporary feeling of being unwell or
circuit, electric shock etc.). There is then no
the time until it subsides depend primarily
liability for harm to persons or damage to
on the difference in brightness between the
property, and the warranty of the manufacturer
blinding-light source and the surrounding area.
is also rendered null and void.
Photosensitive persons in particular ought to
The temperature range in which the SEO 3 can
consult a medical consultant prior to using this
be operated is -20 C° to +50 C°. Ensure that
product.
the SEO 3 is not subjected to more extreme
temperatures, intense vibrations, explosive
As a matter of principle the rule is that high-
atmosphere, solvents and/or vapours.
intensity light sources carry a high secondary
Also continuously exposed to direct sunlight,
hazard potential due to their blinding effect.
high humidity and/or moisture have to be
Just like looking into other bright light sources
avoided.
(e.g. headlights of a car), the temporary limited
impairment of vision and afterimages may lead
Changes, repairs and maintenance over and
to irritation, inconveniences, impairments and
above those described in the documents
even accidents, depending on the situation.
accompanying the product may only be carried
out by authorised technical personnel.
The information applies to the use of a single
Once it is found that the product is filled with
product. If more light-emitting products of
full batteries in correct orientation (polarity!)
the same type or of a different type are used
and correctly closed, but nonetheless a
together, the intensity of the optical radiation
normal, safe operation is not possible or the
may increase.
product shows damage, it must be rendered
inoperative and not used any further. In this
Every longer viewing/eye-contact with the
case, for warranty matters, contact your dealer.
source of radiation of this product by the user
or other persons, with and without other light-
15. Safety instructions
bundling instruments, is to be avoided as a
• This product is not a children's toy.
matter of principle! Instead, the eyes are to be
• Since it has small parts that can be
closed deliberately in such cases and the head
swallowed, it is not suitable for persons
ought to be turned away from the light beam.
below 5 years.
• The article may not be used for examinations
In case of a commercial use or the product’s
of the eyes (e.g. for the so-called pupil test).
use by public bodies, the user must be
• When using it, the accumulation of heat, e.g.
instructed as to all applicable laws and
by covering, must be avoided.
regulations that correspond to the individual
• If the product does not work correctly, the
case of usage.
first thing that must be checked is whether
this is due to discharged batteries or because
Important rules of conduct:
these are not inserted correctly.
• Do not aim the light beam directly into the
• If using in traffic, please follow the respective
eyes of a person.
legal regulations.
• The user or any other person should not look
directly into the light beam.
The hazard that poses the main threat in this
• In the event of optical radiation hitting the
product through optical radiation is the Blue-
eye, the eyes must deliberately shut and the
Light-Hazard (400 nm to 780 nm). Thermal
head is to be turned away from the beam.
hazard threshold values are clearly not
• The instruction manual and this information
reached.
must be stored safely and must be passed
on together with the product.
The risk for the viewer depends on the use or
• It is prohibited to look straight into the light
on how the product is installed. However, there
that is being emitted by this product.
is no optical hazard as long as the aversion
responses limit the time of exposure and
04
Оглавление
- LED LENSER® * SEO 3
- LED LENSER® * SEO 3
- LED LENSER® * SEO 3
- LED LENSER® * SEO 3
- LED LENSER® * SEO 3
- LED LENSER® * SEO 3
- LED LENSER® * SEO 3
- LED LENSER® * SEO 3
- LED LENSER® * SEO 3
- LED LENSER® * SEO 3
- LED LENSER® * SEO 3
- LED LENSER® * SEO 3
- LED LENSER® * SEO 3
- LED LENSER® * SEO 3
- LED LENSER® * SEO 3
- LED LENSER® * SEO 3
- LED LENSER® * SEO 3