Hoover CAPTURE TCP 2120 019: инструкция

GB

IMPORTANT SAFETY REMINDERS

GETTING TO KNOW YOUR CLEANER

This cleaner should only be used for domestic cleaning, as described in this user guide.

attachments recommended or supplied by Hoover.

Please ensure that this guide is fully understood before operating the appliance. Use only

Cord Rewind PedalB.

Main CleanerA.

Suction Regulator*L.

Exhaust Filter CoverD.

Carry HandleC.

WARNING: Electricity can be extremely dangerous. This appliance is double insulated and must

Surface selector PedalO.

Carpet and Floor Nozzle**N.

HandleM.

not be earthed. This plug is tted with a 13 amp fuse (UK only).

On/O PedalE.

IMPORTANT: The wires in the mains power lead are coloured in accordance with the

Telescopic Tube Release Button*G.

Telescopic Tube*F.

Exhaust lterR.

Pre motor lterQ.

HoseP.

following code:

Blue – Neutral Brown – Live

Standard Tube*H.

2 in 1 ToolS.

STATIC ELECTRICITY: Some carpets can cause a small build up of static electricity. Any

Bag Door Release LatchK.

Bag Check IndicatorJ.

Variable Power Control Roller*I.

Pet Hair Remover Mini Turbo Nozzle*T.

Allergen Remover Mini Turbo Nozzle*U.

static discharge is not hazardous to health.

Grand Turbo Nozzle*V.

Hard Floor Caresse Nozzle*W.

Always switch off and remove the plug before cleaning the appliance or attempting any

AFTER USE: Switch the cleaner off and remove the plug from the electricity supply.

maintenance task.

elderly or the infirm.

appliance or its controls. Please supervise the use of the appliance by older children, the

SAFETY WITH CHILDREN, ELDERLY OR THE INFIRM: Do not let children play with the

ASSEMBLING YOUR CLEANER

Remove all components from the packaging.

Connect the hose to the cleaner main body, ensuring it clips and locks into position. To 1.

release: simply press the two buttons on the hose end and pull [2].

service engineer.

we recommend that any servicing or repairs are only carried out by an authorised Hoover

HOOVER SERVICE: To ensure the continued safe and efficient operation of this appliance

Connect the tube lower end to the carpet and oor nozzle 3. [4].

Connect the tube upper end to the handle. 2. [3].

IT IS IMPORTANT THAT YOU DO NOT:

USING YOUR CLEANER

Position the cleaner above you when cleaning the stairs.• 

Use your cleaner out of doors or on any wet surface or for wet pick up.• 

Extract power cord and plug it into the power supply. Do not pull the cord beyond the red 1.

items.

Pick up hard or sharp objects, matches, hot ashes, cigarette ends or other similar • 

marker [5].

raise or lower the handle to the most comfortable cleaning position [6].

Adjust the length of the telescopic tube* by moving the telescopic release button* up and 2.

may cause risk of fire / explosion.

Spray with or pick up flammable liquids, cleaning fluids, aerosols or their vapours as this • 

for the oor type.

Carpet & Floor Nozzle. Press the pedal on the nozzle 3. [7] to select the ideal cleaning mode

supply cord.

Run over the supply cord when using your cleaner or remove the plug by pulling on the • 

Hard Floor: The brushes are lowered to protect the oor

Stand on or wrap the power cord around arms or legs when using the cleaner.• 

Carpet: With lifted brushes for the deepest clean

Continue to use your cleaner if it appears to be faulty. If the supply cord is damaged • 

Use the appliance to clean people or animals.• 

Adjust the power level by rotating the variable power control roller*. 5. [9]

Switch the cleaner on by pressing the On/O pedal on the cleaner main body. 4. [8]

Adjust the suction regulator* to the desired level. 6. [10].

service engineer must replace the supply cord.

stop using the cleaner IMMEDIATELY. To avoid a safety hazard, an authorised Hoover

Switch o at the end of use by pressing the On/O pedal. Unplug and press the cord rewind 7.

Parking and Storage - The tube can be parked for temporary storage while in use, or in the 8.

pedal to wind the power cord back into the cleaner [11].

storage position when not in use [12].

**Nozzle design may vary according to model

*Certain models only

1

GB

CLEANER MAINTENANCE

Removing a Blockage From The System

Replacing The Dust Bag

If the bag check indicator is illuminated or ashing:

If the bag check indicator is red please check and, if necessary, replace the bag.

If it is not full, then;2.

Check if the bag is full. If so refer to ‘Replacing The Dust Bag’.1.

Lift the bag door release latch 1. [13] to open the cover, pull the bag holder [14] and pull the

bag collar to remove the bag [15].

Apply the peel and seal sticker, located on the bag collar, to the bag inlet. The full dust bag 2.

blockage from the Teletube or exible hose.

Check if there is any other blockage in the system - Use a rod or a pole to remove any B.

Do the lters need cleaning? If so refer to ‘Cleaning the Filter’.A.

should be disposed of correctly and carefully.

Fold a new bag as shown on the bag and t by inserting the collar into the bag holder.3.

blockage or if the lters are dirty. If the cleaner is used for a signicant period of time with the

Warning - The bag check indicator will turn red if the cleaner is used when full, if there is a

Ret the bag holder and close the bag door.4.

bag check indicator is red, a thermal cut out will switch the cleaner o to prevent overheating.

cut out has been activated. If this should happen, switch the cleaner o, unplug and correct the

The bag check indicator turn green once the cleaner has switched o to signal that the thermal

Warning - The bag door will NOT close if the dust bag and/or the bag holder are not assembled

to the cleaner. Always ensure the bag and bag holder are present when closing the bag door.

fault. It will take about 30 minutes for the cut out to automatically reset.

Remember: The bag check indicator may also be red if an obstruction has occurred. In this case

refer to ‘Removing A Blockage From the System’.

Cleaning the Filters

To maintain optimum performance of your cleaner, please wash the lters after each 5 bag

changes.

ACCESSORIES AND NOZZLES

Cleaning the pre-motor lter:

All accessories can be tted to the end of the handle or the end of the tube. [23]

To remove the pre-motor lter slide the pre-motor lter frame from the cleaner. 2. [16]

Lift the bag door release latch 1. [13] to open the cover and remove the bag holder.

Remove the lter from the holder.3. [17]

By rotating the end piece converts to a dusting brush. The 2 in 1 tool can be stored neatly at

2 in 1 tool – Combines two functions in one, the 2 in 1 tool can be connected as a crevice tool.

cleaner [21].

Wash it in hand warm water, 4. [20] and allow it to dry thoroughly before replacing to the

the rear of the cleaner. [22]

Cleaning the exhaust lter:

Crevice Tool – For corners and hard to reach areas.

Dusting Brush – For bookshelves, frames, keyboards and other delicate areas. To extend the

brushes push the button on the body of the tool.

the cleaner. [21].

Wash the lter in hand warm water 2. [20] and allow it to dry thoroughly before replacing to

[19]

To remove the exhaust lter, unclip the exhaust lter cover 1. [18] and remove the lter pack.

Pet Hair Remover Mini Turbo Nozzle* – Use the mini turbo nozzle on stairs or for deep

cleaning on textile surfaces and other hard to clean areas [1T].

Remember: Do not use hot water or detergents. In the unlikely event of the lters becoming

Allergen Remover Mini Turbo Nozzle* – Use the mini turbo nozzle on stairs or for deep

bag or lter tted.

damaged, t a Genuine Hoover replacement. Do not try and use the product without a dust

cleaning on textile surfaces and other hard to clean areas. [1U]

Grand Turbo Nozzle* – Use the turbo nozzle for deep cleaning on carpets. [1V]

Cleaning the permanent cloth dust bag*

Hard Floor Caresse Nozzle*– For wooden oors and other delicate oors. [1W]

bag under hand warm water after every 5 full bags. Remove excess water and leave to dry fully

To maintain optimum performance we recommend that you wash the permanent cloth dust

before replacing.

IMPORTANT: Do not use the grand turbo nozzle or mini turbo nozzles on rugs with long

fringes, animal hides and carpet pile deeper than 15mm. Do not keep the nozzle stationary

while the brush is rotating.

*Certain models only

2