Cambridge Audio Azur 640T: 640T DAB/FM tuner

OPERATING INSTRUCTIONS

Tuning aand llistening tto tthe 6640T

Clock /Alarm/ Sleep ffunctions

Press the Standby/On button on the front panel.

When the unit is tuned into an RDS broadcast, the clock time will be

For DAB stations, select DAB mode using the DAB/FM button.

set automatically.

Press the Autotune button. The 640T will search for all available DAB

If you cannot receive RDS FM transmissions, you can set the clock manually.

stations and display them in alphabetical order on the display.

Setting tthe CClock mmanually:

Press the Step buttons to scroll through the list.

With the unit turned on hold the Alarm button on the remote control

Press the Select button to listen to your chosen station.

down until the display reads ‘Set Time: Manual’, then press Select.

For FM stations, select FM mode using the DAB/FM button.

By immediately using either of the Step (< >) buttons, the time may then

Press the Autotune button. The 640T will scan up through the FM band

be altered (after four seconds of inactivity the screen changes back to

and play the first station found (RDS may accompany a strong signal).

the normal idle screen i.e out of Manual clock mode).

Press the Autotune button again to scan up to the next available station

The AAlarm ffunction wwill tturn oon tthe 6640T aat aa cchosen ttime:

(to scan down the FM band press and hold the Autotune button).

Press Alarm on your remote handset. ‘Alarm’ and ‘Off’ will appear.

DAB Manual ffine ttune

Press Select. ‘00:00’ will appear.

Press the (< >) keys to alter the time (‘Alarm Setting’ will be displayed).

Hold the select button down until ‘Manual Tune’ appears on the display.

Press Select again to set (press twice to turn off Alarm function).

Frequency and name of the particular station will be displayed.

An asterisk will appear on the LED display to indicate if the alarm has

Use the Step buttons to adjust the frequency

been set, when the 640T is in Standby mode.

Press Select again until DAB is displayed.

The SS

leep ffunction wwill tturn tthe 6640T ooff aafter aa sset pperiod:

Setting PPresets

Press the Alarm button twice when the unit is on.

Select the station you wish to store and hold down the desired preset

Select number of minutes required (01 - 99).

number (e.g 3) until the display shows that the station has been stored.

Press Select again to activate.

To store the presets 6-10 press the Shift button first. You can store 10

NB: It is necessary to reset the Sleep function before each use.

stations for both FM and DAB.

Press chosen Preset button at any time to listen to the corresponding station

Natural CContour TTechnology

Experiment with the three available settings (switch on rear panel) to

DAB SSystem RReset

achieve the optimum tone from your 640T.

If the 640T is moved to another location where there are different

stations then the old stations should be removed from the memory.

To do a system reset unplug the 640T then hold down the Select button

whilst plugging back in.

Continue holding Select until "System Reset" appears on the display.

8 azur DAB/FM tuner