Sparky Group BUR 15E: IV - Additional safety rules

4

BUR 15E • BUR 18EEN

POWER TOOL USE AND CARE

▪ Ensure that the lighting is adequate.

▪ Do not put pressure on the drill, such that it

▪ Do not force the power tool. Use the correct

slows the motor down. Allow the drill bit to cut

power tool for your application. The correct

without pressure. You will get better results and

power tool will do the job better and safer at the

you will be taking better care of your tool.

rate for which it was designed.

▪ Keep the area free of tripping hazards.

▪ Do not use the power tool if the switch does not

▪ Do not let anyone under 18 years operate this

turn it on and off. Any power tool that cannot

tool.

be controlled with the switch is dangerous and

▪ Only use accessory bits in good condition.

must be repaired.

▪ Before drilling, check that there is sufficient

▪ Disconnect the plug from the power source be-

clearance for the drill bit under the workpiece.

fore making any adjustments, changing acces

-

▪ Do not touch the bit after operation. It will be

sories, or storing power tools. Such preventive

very hot.

safety measures reduce the risk of starting the

▪ Keep your hands away from under the work

-

power tool accidentally.

piece.

▪ Store idle power tools out of the reach of chil

-

▪ Never use your hands to remove sawdust, chips

dren and do not allow persons unfamiliar with

or waste close by the bit.

the power tool or these instructions to operate

▪ Rags, cloths, cord, string and the like should

the power tool. Power tools are dangerous in

never be left around the work area.

the hands of untrained users.

▪ Support the work properly.

▪ Maintain power tools. Check for misalignment

▪ If you are interrupted when operating the drill,

or binding of moving parts, breakage of parts

complete the process and switch off before

and any other condition that may affect the

looking up.

power tool’s operation. If damaged, have the

▪ Periodically check that all nuts, bolts and other

power tool repaired before use. Many accidents

fixings are properly tightened.

are caused by poorly maintained power tools.

▪ When using the drill, use safety equipment in

-

▪ Keep cutting tools sharp and clean. Properly

cluding safety glasses or shield, ear defenders,

maintained cutting tools with sharp cutting

and protective clothing including safety gloves.

edges are less likely to bind and are easier to

Wear a dust mask if the drilling operation cre

-

control.

ates dust.

▪ Use the power tool, accessories and tool bits

etc., in accordance with these instructions and

If in doubt, do not plug in the tool. Using a power

in the manner intended for the particular type

source with a voltage less than the nameplate rat

-

of power tool, taking into account the working

ing is harmful to the motor.

conditions and the work to be performed. Use

of the power tool for operations different from

The tool must be used only for its prescribed pur

-

intended could result in a hazardous situation.

pose. Any use other than those mentioned in this

Manual will be considered a case of misuse. The

SERVICE

user and not the manufacturer shall be liable for

any damage or injury resulting from such cases

▪ Have your power tool serviced by a qualified

of misuse.

repair personnel using only identical replace

-

ment parts. This will ensure that the safety of

To use this tool properly, you must observe the

the power tool is maintained.

safety regulations, the assembly instructions and

the operating instructions to be found in this Man

-

ual. All persons who use and service the machine

have to be acquainted with this Manual and must

IV - Additional safety rules

be informed about its potential hazards.

for drills

Children and frail people must not use this tool.

Children should be supervised at all times if they

Wear ear protectors with impact drills. Expo-

are in the area in which the tool is being used. It

sure to noise can cause hearing loss.

is also imperative that you observe the accident

Use auxiliary handles supplied with the tool.

prevention regulations in force in your area. The

Loss of control can cause personal injury.

same applies for general rules of occupational

▪ If possible, always use clamps or a vice to hold

health and safety.

your work.

The manufacturer shall not be liable for any

▪ Always switch off before you put the drill down.

changes made to the tool nor for any damage re

-

pages-BUR15-18-[13mm].indd 4 22.3.2006 ã. 09:05:33