Sparky Group BUR 15E: II - Technical specifications

II - Technical specifications

BUR 15E BUR 18E

▪ Nominal battery charge: 14.4 V 18 V

▪ Charger: 230–240V ~ 50Hz 230–240V ~ 50Hz

▪ Batteries: 2 x 1.5 Ah 2 x 1.5 Ah

▪ Charging time: 1.5 Hours 1.5 Hours

-1

-1

▪ Drill no load speed: 0–350, 0–1250 min

0–350, 0–1250 min

▪ Torque settings: 20 Positions 20 Positions

▪ Drill chuck capacity: 13 mm Keyless 13 mm Keyless

▪ Max drilling capacity in

steel / wood / concrete: 10 / 28 / 10 mm 13 / 28 / 13 mm

-1

-1

▪ Hammer impact frequency: 0–5600, 0–20.000 min

0–5600, 0–20.000 min

▪ Weight: 2.1 kg 2.1 kg

▪ When operating a power tool outdoors, use an

III - Safety instructions

outdoor extension cord suitable for outdoor use.

Use of a cord suitable for outdoor use reduces

WARNING. Read and understand all instructions.

the risk of electric shock.

Failure to follow all instructions listed below may

result in electric shock, fire and/or serious injury.

PERSONAL SAFETY

The term “power tool” in all of the warnings below

refers to your mains-operated (corded) power tool

▪ Stay alert, watch what you are doing and use

or battery-operated (cordless) power tool.

common sense when operating a power tool.

Save these instructions!

Do not use a power tool while you are tired or

under the influence of drugs, alcohol, or medi

-

WORK AREA

cation. A moment of inattention while operating

power tools may result in serious personal in

-

▪ Keep work area clean and well lit. Cluttered and

jury.

dark areas invite accidents.

▪ Use safety equipment. Always wear eye protec-

▪ Do not operate power tools in explosive atmos

-

tion. Safety equipment such as a dust mask,

pheres, such as in the presence of flamma-

non-skid safety shoes, hard hat, or hearing

ble liquids, gases, or dust. Power tools create

protection used for appropriate conditions will

sparks which may ignite the dust or fumes.

reduce personal injuries.

▪ Keep children and bystanders away while oper-

▪ Avoid accidental starting. Ensure the switch is

ating a power tool. Distractions can cause you

in the off-position before plugging in. Carrying

to lose control.

power tools with your finger on the switch or

plugging in power tools that have the switch on

ELECTRICAL SAFETY

invites accidents.

▪ Power tool plugs must match the outlet. Never

▪ Remove any adjusting key or wrench before

modify the plug in any way. Do not use any

turning the tool on. A wrench or a key that is left

adapter plugs with earthed (grounded) power

attached to a rotating part of the power tool may

tools. Unmodified plugs and matching outlets

result in personal injury.

will reduce risk of electric shock.

▪ Do not overreach. Keep proper footing and bal

-

▪ Avoid body contact with earthed or grounded

ance at all times. This enables better control of

surfaces such as pipes, radiators, ranges and

the power tool in unexpected situations.

refrigerators. There is an increased risk of elec-

▪ Dress properly. Do not wear loose clothing or

tric shock if your body is earthed or grounded.

jewellery. Keep your hair, clothing and gloves

▪ Do not expose power tools to rain or wet condi

-

away from moving parts. Loose clothes, jewel-

tions. Water entering a power tool will increase

lery or long hair can be caught in moving parts.

the risk of electric shock.

▪ If devices are provided for the connection of

▪ Do not abuse the cord. Never use the cord for

dust extraction and collection facilities ensure

carrying, pulling or unplugging the power tool.

that these are connected and properly used.

Keep cord away from heat, oil, sharp edges or

Use of these devices can reduce dust related

moving parts. Damaged or entangled cords in

-

hazards.

crease the risk of electric shock.

pages-BUR15-18-[13mm].indd 3 22.3.2006 ã. 09:05:33