Korting HK4103B: ENGLISH
ENGLISH: Korting HK4103B
GB
ENGLISH
If a built-in oven or any other appliance that generates heat
GENERAL
must be fitted directly under the glass-ceramic cooktop,
THIS APPLIANCE (oven) AND THE GLASS-CERAMIC COOKTOP
Carefully read the contents of this lea et since it provides
MUST BE SUITABLY INSULATED in such a way that the heat
important instructions regarding safety of installation, use and
generated by the oven, measured on the bottom right of
maintenance. Keep the lea et for possible future consultation.
the cooktop, does not exceed 60°C. Failure to respect this
All the operations relating to installation/replacement (electri-
precaution may determine improper functioning of the
cal connections) must be carried out by specialised personnel
TOUCHCONTROL system.
in conformity with the regulations in force.
· Positioning (Fig.1)
SAFETY WARNINGS
The domestic appliance is designed to be built into a worktop
as illustrated in the speci c gure. Apply sealant around the
It is recommended to use at-bottom pans with a diameter
entire perimeter (cut-out dimensions Fig.1B).
equal to or slightly larger than that of the heated area. Do not
Fix the domestic appliance on the worktop by means of the
use pans with a rough base to prevent scratching the heat
4 brackets provided, taking the thickness of the worktop into
surface of the cooktop (Fig.2).
account (Fig.1A). If the lower part of the appliance, after instal-
This appliance is not suitable for use by children or persons
lation, is accessible via the lower part of the cabinet then it is
requiring supervision. Do not let children play with the ap-
necessary to mount a separator panel respecting the distances
pliance.
indicated (Fig.1C). If the appliance is installed with an oven
underneath then the separator is not necessary.
Before connecting the appliance to the electricity sup-
ply:
· Electrical connections
- Check that the voltage and power values listed on the data
Before making the electrical connections, check that:
plate (positioned on the lower part of the appliance) are com-
- the ground cable is 2 cm longer than the other cables;
patible with the electricity supply and socket. If you have any
- the system ratings meet the ratings indicated on the identi-
doubts, please consult a quali ed electrician for assistance.
cation plate xed on the lower part of the worktop;
- the system is tted with e cient earthing compliant to the
Important
laws and regulations in force.
- Avoid spilling liquid, therefore to boil or heat liquids,
Earthing is obligatory by law.
reduce the heat.
If the appliance is not tted with a cable, use type:
- Do not leave the heating elements on with empty pots
“H05V2V2-F” for a power level of up to 6400 Watts. The cross-
and pans or without receptacles.
section of the cable should be at least 2.5 mm, or 4 mm for
- When you have nished cooking, switch o the relevant
greater power levels.
heating element with the control indicated below.
The cable should never reach a temperature which is 50°C
above the temperature of the room in which it is installed.
Attention:
The appliance is designed for permanent connection to the
- Steam cleaners must not be used.
electricity supply and should therefore be fitted with an
- If the surface is cracked, switch o the appliance to
omnipolar switch which has a minimum opening of 3 mm
prevent electric shock.
between contacts. The switch should be suitable for the char-
- This appliance is not intended for use by young children
ge indicated on the appliance data plate and must conform to
or in rm persons without supervision
all current legislation (the yellow/green earth wire must not
- Young children should be supervised to ensure they do
be interrupted by the switch).
not play with the appliance
The omnipolar switch must be easy to reach once the instal-
lation process has been completed.
This appliance conforms to the European Directive EC/2002/96,
Waste Electrical and Electronic Equipment (WEEE). By making
USE AND MAINTENANCE
sure that this appliance is disposed of in a suitable manner, the
user is helping to prevent potential damage to the environ-
· Maintenance
ment or to public health.
Remove any residues of food and drops of grease from
the cooking surface using the special scraper supplied on
The
symbol on the product or on the accompanying pa-
request (Fig.3)
perwork indicates that the appliance should not be treated as
Clean the heated area as thoroughly as possible using SIDOL,
domestic waste, but should be delivered to a suitable electric
STAHLFIX or similar products and a cloth/paper, then rinse
and electronic appliance recycling collection point. Follow lo-
with water and dry with a clean cloth.
cal guidelines when disposing of waste. For more information
Using the special scraper (optional) immediately remove any
on the treatment, re-use and recycling of this product, please
fragments of aluminium and plastic material that have unin-
contact your local authority, domestic waste collection service
tentionally melted on the heated cooking area or residues of
or the shop where the appliance was purchased.
sugar or food with a high sugar content (Fig.3). In this way,
any damage to the cooktop surface is prevented.
INSTALLATION INSTRUCTIONS
Under no circumstances use abrasive sponges or irritating
chemical detergents such as oven sprays or stain removers.
These instructions address specialised installers and serve
as a guide for installation, adjustment and maintenance in
conformity with the laws and regulations in force.
- 14 -
· Use
Even when the lock button is activated, button A will con-
Use the touch control system in the corresponding position
tinue to work.
relative to the individual cooking needs. Keep in mind that the
higher the number, the more heat that it is produced.
Heat up (Rapid heating)
The Heat up function can be used to set the cooking zone
· Operation ( g.4-5-6)
to its maximum temperature for a speci ed period of time,
A = ON/OFF button
after which the temperature will return to a lower value
B = Lock button
selected previously.
C = + button
To activate the Heat up function, select the hotplate by pres-
D = - button
sing the + button until setting 9 is displayed; if the button is
E = ON/OFF indicator light lock button
pressed again a decimal point “•” or the letter “A” will appear
F = Cooking zone selector button
on the display (next to the digit 9) for 5 seconds. This means
G = Double cooking zone ON/OFF indicator light
the Heat up function is active.
I = Rapid heating function (Heat up) active
The desired power level (between 1 and 8) should be selected
L = Double zone selector button
within 5 seconds. If power level 9 is selected, the function is
P = Timer buttons (+ / -)
disabled. To deactivate the Heat up function, simply select the
Q = Cooking zone display
+ button and hold it down until setting 9 is reached and the
R = Timer Display
decimal point disappears from the display. When the “Heat
up” function is active, the previously selected temperature
Depending on the model purchased, the rst time the hob
level may be increased by pressing the (+) button. Once the
is switched on its safety setting may be activated, i.e. the
cooking zone has reached the selected temperature, the “Heat
“Lock button indicator light” (E) will be illuminated. To use
up” function is automatically deactivated and the hob emits
the hob, press and hold sensor E for 3 seconds, until the
a BEEP. The cooking zone will operate in a constant manner,
indicator light switches o .
at the set power level.
- The appliance can be switched on by selecting start-up
Timer ( g. 5-6)
sensor A. A zero will appear on all displays for 10 seconds. If
Depending on the model of the hob, it may be equipped with
no command is made within 10 seconds, the hob will switch
a TIMER function.
o again.
This function can be used to set an amount of time (between
- A hotplate can be switched on by selecting the “+” or “-”
00 and 99 minutes) after which the selected cooking zone will
sensor within 10 seconds. If sensor D is used the display will
switch o automatically.
show selection 9, while if sensor C is used, the display will
show selection 1.
Operation:
- Once this step is complete the user may make temperature
- Select the + or - button corresponding to function P; 00 will
adjustments using the “+” or “-” buttons.
appear on the timer display.
- The hotplate can be switched o by selecting “0” using sensor
- Use the “+” and “-” buttons to set the desired timer period.
D; after 3 seconds the cooking zone will switch o .
- If the + button is pressed for more than 2 seconds, the desired
A hotplate can also be switched o by selecting the “+” or “-”
time values can be reached more quickly.
sensors simultaneously.
- Select a cooking zone and set the desired temperature level
- The hob can be switched o by selecting the main start-up
(between 1 and
9).
sensor A. If all the hotplates are set to “0” the hob switches
- Once the programmed time has elapsed, display P will emit
o after 10 seconds.
a sound signal and will begin to ash.
- If the hob is tted with extendable hotplates, the second zone
This signal can be deactivated by touching the + and - buttons
may be switched on after the user has ensured that:
on timer display P.
- the LED corresponding to lock button B
is switched o (if it
- If you wish to stop the TIMER function before the set time has
is not, deactivate it).
elapsed, press the + and - buttons simultaneously.
- Press button A to switch on the hob.
- Select the desired hotplate and adjust the power level using
THE MANUFACTURER DECLINES ALL RESPONSIBILITY
the “+” and “-” buttons.
FOR EVENTUAL DAMAGES CAUSED BY BREACHING THE
- Once the power has been adjusted, select button L to activate
ABOVE WARNINGS.
the double zone.
- To deactivate the double zone, simply press button L.
- If an object has been placed on top of the control panel, the
hob will automatically revert to OFF mode.
When a hotplate is in the OFF mode and the temperature
of the glass surface is greater than approximately 50°, there
will be a light signal “H” on the corresponding cooking zone
display.
- Function B locks hob operation the moment it is selected.
E.g.: if the function is activated when two zones of the hob are
switched on, the programme remains locked at that level, even
if the user attempts to switch on another zone. The same thing
happens if the appliance is switched o and the lock function
is activated: the user will not be able to switch the hob on.
To activate or deactivate it, hold a nger in front of sensor B
for approximately two seconds. The function is active when
indicator light E is illuminated.
- 15 -