Главная > Инструкция к Варочной Панели Korting HI3200B > ENGLISH

Korting HI3200B: ENGLISH

ENGLISH: Korting HI3200B

ENGLISH

patible with the electricity supply and socket. If you have any

GENERAL

doubts, please consult a qualified electrician for assistance.

Carefully read the contents of this leaet since it provides

Important:

important instructions regarding safety of installation,

- Metal objects such as knives, forks, spoons or lids must not

use and maintenance. Keep the leaet for possible future

be placed on the cooker surface as they can get hot.

consultation. All the operations relating to installation

- After use, switch the cooker off using the control device and

(electrical connections) must be carried out by specialised

do not rely on the pan detector.

personnel in conformity with the regulations in force.

- Avoid liquid spilling, therefore to boil or heat liquids reduce

the heat supply.

1.1Theprincipleofinduction:

- Do not leave the heating elements switched on with empty

The system of cooking by induction is based on the physical

vessels or without vessels.

phenomenon of magnetic induction. The fundamental

- When you have finished cooking, switch off the relative

feature of this system is direct transfer of heat energy from the

resistance using the control indicated below.

generator to the pan without intermediate means (dierent

- Never use aluminium foil for cooking, or never place products

from traditional cooker tops see Fig.1).

wrapped in aluminium foil onto the cooking surface. The alu-

minium would melt and damage your apparatus irreversibly.

1.2Advantages:

- Never heat a tin or can of food without opening it – it could

If you compare your electric cooker tops, with the induction

explode! This warning applies to hobs of all types.

cooker top, the result will be:

- The use of high power like the Booster function is not suitable

-Safer: low temperature on the glass surface.

for heating some liquids like, for example, frying oil. The exces-

-Quicker: brief heating times.

sive heat may be dangerous. In these cases, we recommend

- More precise: the top reacts immediately to your

using a lower power.

commands.

- The containers must be placed directly on the hob and must

- More ecient: 90% of the energy absorbed is tran sfor med

be centred. Do not, in any case, insert objects between the

into heat.

pan and the hob.

Furthermore, once the pan has been removed from the hob,

- In a situation of high temperatures, the appliance automati-

heat transmission is stopped immediately, thereby preventing

cally decreases the power level of the cooking areas.

the needless dispersion of heat.

The system also automatically recognises the various

Attention: steam cleaners must not be used.

diameters of all pans and uses a suitable power level for

Attention: if the surface is cracked, switch the ap paratus off

each size.

to prevent electric shocks.

This means that we are able to use pans of various sizes,

Attention: the appliance is not intended to be operated by

provided that the pan diameter is no more than 10% larger

means of external timer or separated remote-control system.

- or 40% smaller - than the printed detail marked on the hob

(Fig.4B).

This appliance conforms to the European Directive EC/2002/96,

Caution: if you are using a pan with a diameter which is more

Waste Electrical and Electronic Equipment (WEEE). By making

than 40% smaller than the printing marked on the glass, the

sure that this appliance is disposed of in a suitable manner, the

cooking zone may not be activated.

user is helping to prevent potential damage to the environ-

ment or to public health.

1.3Cookingvessels(Fig.4A):

Cooking by induction uses magnetism to generate heat. The

The symbol on the product or on the accompanying

vessels must therefore contain iron.

paperwork indicates that the appliance should not be

Check if the vessel material is magnetic using a magnet.

treated as domestic waste, but should be delivered to a

suitable electric and electronic appliance recycling collection

Important:

point. Follow local guidelines when disposing of waste. For

To prevent permanent damage to the cooker surface, do

more information on the treatment, re-use and recycling of

not use:

this product, please contact your local authority, domestic

- Pans with bases that are not perfectly at.

waste collection service or the shop where the appliance was

- Metal pans with enamelled bases.

purchased.

- Do not use pans with rough bases as they may scratch the

hob’s surface.

INSTALLATION INSTRUCTIONS

SAFETY WARNINGS

These instructions address specialised installers and serve

as a guide for installation, adjustment and maintenance in

This apparatus is not suitable for use by children or persons

conformity with the laws and regulations in force.

who need supervision. Do not allow children to play with

the apparatus. Before using the induction cooker top it is

Positioning (Fig.6):

important to check that the apparatus is compatible with

The appliance is made for xing into a worktop, as shown in

anyone who has a pacemaker and active surgical implants.

the relevant gure. Apply the supplied sealant to the entire

perimeter of the hob and insert it into the tment hole (for

Beforeconnectingtheappliancetotheelectricitysupply:

sizing see Fig.6B). Fix the appliance into the worktop with the 4

- Check that the voltage and power values listed on the data

stays, rotating them according to the top’s depth (Fig.6A).

plate (positioned on the lower part of the appliance) are com-

If the underside of the appliance will be accessible after

- 30 -

installation, a separator panel G (Fig.9A) will need to be

D = “-” key / Timer “-” key

mounted maintaining the distances shown (Fig.9B).

E = “+” key / Timer “+” key

If the appliance is installed over an oven the panel is not

I = Decimal point indicator

necessary (Fig.10A-10B).

- To activate the hob, press the “ON/OFF” key. Some zeros with

Important: if there is an oven under the induction hob it is

flashing decimal points will appear for about 20 seconds on

advisable for it to have a cooling fan. Do not use the induction

all the displays.

hob while PYROLITIC cleaning is in process.

If no operation is carried out within this time, the hob will

turn off.

Warning: to allow the circulation of as much fresh air as

- A cookingzonemaybeswitchedon by selecting one of

necessary, there must be at least 40 mm between the

the “C” keys.

induction hob module and any appliance installed under it

- The display will view the corresponding numbers; the grading

(Fig.10B). In any event, adequate aeration must be provided.

of the concerned zone will be intense while the others will be

To allow fresh air circulation there must be openings in

weaker.

the kitchen furniture (Fig.9A-10A) of the sizes indicated in

- Use “+” or “-” buttons to regulate the power level.

Fig.9B-10B.

- By selecting the “-” key the power level goes directly to 9.

- If after about 10 seconds no operation is carried out, display

Electrical connections (Fig.2B - Fig.3B):

shade goes back to the initial one. The hob will continue its

Before making the electrical connections, check that:

normal cooking.

- the ground cable is 2 cm longer than the other cables;

- If the power level is set at zero, the cooking zone will shut

- the system ratings meet the ratings indicated on the identi-

off.

fication plate fixed on the lower part of the worktop;

- To turnoffthecookingzone, select the corresponding “C”

- the system is fitted with efficient earthing compliant to the

key and switch the cooking level to 0.

laws and regulations in force.

- The display will view the corresponding numbers; the grading

If the appliance is not fitted with a cable, use type:

of the concerned zone will be intense while the others will be

“H05V2V2-F” for a power level of up to 6400 Watts. The cross-

weaker.

section of the cable should be at least 2.5 mm², or 4 mm² for

- All operations will be combined with a “BEEP” acoustic

greater power levels. The cable should never reach a tem-

signal.

perature which is 50°C above the temperature of the room in

- When a cooking zone “C” is brought to the OFF position and

which it is installed. The appliance is designed for permanent

the glass top temperature is greater than approximately 50°,

connection to the electricity supply and should therefore be

the display of the interested zone will signal a fixed “H”.

fitted with an omnipolar switch which has a minimum opening

of 3 mm between contacts. The switch should be suitable for

Warning:

the charge indicated on the appliance data plate and must

To prevent damage being inicted on the electronic circuits,

conform to all current legislation (the yellow/green earth wire

the hob is fitted with an overheating safety system.In

must not be interrupted by the switch).

situations where the appliance is used at high power levels for

The omnipolar switch must be easy to reach once the instal-

a prolonged period of time, the hob may switcho one or more

lation process has been completed.

of the activated zones temporarily, until the temperatures

return to the set levels.On the display corresponding to the

USE AND MAINTENANCE

cooking zone which has been temporarily switched o, the

power level will be shown in alternation with a E/2.This will

•Use(Fig.2):

stop ashing once the cooking zone has beenreactivated.

A = ON/OFF key

B=Cookingzone display

•Keyfunction:

C=Cookingzoneselection key

To keep children or persons needing supervision from using

D = “-” key / Timer “-” key

the hob surface, all of the functions can be blocked in the

E = “+” key / Timer “+” key

following way:

F = Timer Display

1- Switch to hob on (if it is off) by selecting the “ON/OFF”

I = Decimal point indicator

key. The cooking zones must be off.

2- Press the “-” key and the R2 (Fig.2), R4 (Fig.3) or R3 (Fig.4)

•Use(Fig.3):

key simultaneously according to the model you own.

A = ON/OFF key

3- Press only the cooking zone R2 (Fig.2), R4 (Fig.3) or R3

B=Cookingzone display

(Fig.4) key once again according to the model you own.

B1=CookingzoneR2 display - Timer display

The “L” letter indicating that the function is active will appear

B2=CookingzoneR3 display - Timer display

on the display.

C=Cookingzoneselection key

Should one or more zones still be hot, the letter “H” and “L”

D = “-” key / Timer “-” key

will alternate on the relative displays.

E = “+” key / Timer “+” key

- To deactivatethekeyfunction, switch the hob off (if it

I = Decimal point indicator

is on) by selecting the “ON/OFF” key.

- Once it is off, switch the hob back on.

•Use(Fig.4):

- Press the “-” key and the R2 (Fig.2), R4 (Fig.3) or R3 (Fig.4)

A = ON/OFF key

key simultaneously according to the model you own.

M1=CookingzoneR1 display

- Press the“-” key a second time.

M2=CookingzoneR2 display - Timer display

- Zeros will appear on all the displays for a few seconds.

M3=CookingzoneR3 display

- If the cooker top is switched off with the KEY function active,

N = Timer Display

when subsequently activated the top will be in the same

C=Cookingzoneselection key

situation, meaning with the KEY function active.

- 31 -

- If the hob is switched on and theLockfunction is enabled,

standard function.

button ON/OFF will still work.

•MinuteMinder(Countdown):

•Magneticsensor:

This function can be used both with cooking zones activated/

- The hob is equipped with a pan sensor; when the pan is

deactivated and with the timer inserted.

- The Minute Minder allows to set an established countdown

removed or badly positioned, the

symbol will appear.

that goes from 1 to 99 minutes.

If, on the other hand, the surface of the glass is still hot, the

On expiry of the time, the hob emits an acoustic signal without

symbol will appear alternating with the .

changing the active functions.

Activation:

•O.S.D.(OverowSafetyDevice):

1- The function is activated with the hob on.

The hob is equipped with a safety system which moves all

2- Press the “+” and “-” keys simultaneously.

hotplates to the OFF position and activates the safety lock

3- Adjust the time within about 10 seconds by using the

when liquids or items are detected on the control panel.

“+” and “-” keys. By pressing the “-” key directly the time

These symbols will ash on the display:

will be set at 30 minutes.

They can be deactivated by removing the item or the liquid.

3/4burnerversion:

The hob will switch o automatically.

- If no zone is activated or if the hob is deactivated by

selecting the ON/OFF key, the decimal point on the R2

•Timer:

and R3 displays begins to flash.

Note: the Timer can be activated on all the cooking zones

- If the hob is turned on with the Minute Minder function

simultaneously.

active, zeros will appear on all the displays. By pressing

This function allows to establish the time (from 1 to 99 minutes)

the “+” and “-” keys simultaneously, the remaining time

or automatic switch-o of the cooking zone selected.

will appear.

Activation:

- In order to view the remaining time of the Minute

1- Select the cooking zone “C”.

Minder press the“+” and “-” keys simultaneously. On the

2- Set the cookinglevel.

“B1” and “B2” displays (4 burner version) and on the “M2”

3- Press the “+” and “-” keys simultaneously. The decimal

and “N” displays (3 burner version) the remaining time will

point “•” will start to ash. The time on the timer will appear

appear.

on the relative displays.

- When time is up an acoustic signal beeps and the timer

4- Adjust the time within about 10 seconds by using the

displays ash. Any key can be selected to stop the acoustic

“+” and “-” keys. By pressing the “-” key directly the time

signal. If you leave the acoustic signal it will deactivate

will be set at 30 minutes.

after about 2 minutes.

3/4burnerversion:

2burnerversion:

- If the decimal point “•” appears on the displays, it means

- If the “F” displays of the timer or the hob are deactivated,

that timer is active.

by selecting the ON/OFF key the remaining time of the

- During cooking the time set previously with the timer is

Minute Minder will appear

not displayed.

- If the Minute Minder and the Timer are active, the “F”

- In order to view the time remaining on the Timer of a

display will signal the time left. If it is the Timer function,

cooking zone, select that cooking zone and then press

the decimal point of the concerned zone will flash.

the “+” and “-” keys simultaneously. On the “B1” and

- When time is up an acoustic signal beeps and the timer

“B2” displays (4 burner version) and on the “M2” and

displays ash. Any key can be selected to stop the acoustic

“N” displays (3 burner version) the remaining time will

signal. If you leave the acoustic signal it will deactivate

appear.

after about 2 minutes.

- When time is up an acoustic signal beeps and the timer

displays ash. Any key can be selected to stop the acoustic

To deactivatetheMinuteMinderfunctionbeforetheset

signal. If you leave the acoustic signal it will deactivate

time, press the “+” and “-” keys simultaneously. By selecting

after about 2 minutes.

the “-” key a second time the time goes to zero. After that the

2burnerversion:

cooking zone will continue its standard function.

- If the decimal point “•” appears on the displays, it means

It is possible to use the Minute Minder and the Timer

that timer is active.

simultaneously.

- When the decimal point ashes it indicates the zone with

the least time on the timer and therefore the rst zone will

•Booster(Fig.2-3-4):

switch o. The timer display will show the remaining time

Depending on the appliance model, it may be tted with a

of the next zone which will switch o.

Booster system which can be used to speed up cooking times

- In order to view the time remaining on the Timer of a

through the application of a power level which is greater than

cooking zone, select that cooking zone and then press the

the nominal value, within a dened period of time.

“+” and “-” keys simultaneously. Afterwards the remaining

The cooking zones supplied with this function are indicated

time will appear on the timer “F” display.

in Fig.2-3-4 by the letter (Z).

- When time is up an acoustic signal beeps and the timer

1- To activate it, switch on the concerned cooking zone

displays ash. Any key can be selected to stop the acoustic

bringing the power level to 9.

signal. If you leave the acoustic signal it will deactivate

2- By selecting the “+” key on the display the letter “P” will

after about 2 minutes.

appear.

- The Booster can be activated simultaneously on all the

To deactivatethetimerfunctionbeforethesettime,

enabled zones.

select the cooking zone and then press the “+” and “-” keys

- The Booster function will be active for about 5 minutes, after

simultaneously. By selecting the “-” key a second time the

which cooking will continue at level 9.

time goes to 0. After that the cooking zone will continue its

- In order to stop this function, select the concerned cooking

- 32 -

zone and the “-” key until you reach the desired level.

- All operations will be combined with a “BEEP” acoustic signal.

- The Booster might not turn on if the cooking zone

(indicated by the letter (Z)) was activated previously with high

temperature levels.

•Integratedpowercontrol(Fig.5):

Each phase (this is divided into two zones in a vertical line: F1

e F2) is capable of using a maximum power of 3,700W.

If this is exceeded for example by activating the Booster,

the software automatically lowers power of the previously

selected zone until it reaches the allowed power level.

The display of the zone with limited power will begin to ash

for about 3 seconds. During this time it is possible to modify

the power level.

•Maintenance(Fig.8):

Remove any residues of food and drops of grease from

the cooking surface using the special scraper supplied on

request.

Clean the heated area as thoroughly as possible using SIDOL,

STAHLFIX or similar products and a cloth/paper, then rinse

with water and dry with a clean cloth.

Using the special scraper (optional) immediately remove

any fragments of aluminium and plastic material that have

unintentionally melted on the heated cooking area or residues

of sugar or food with a high sugar content. In this way, any

damage to the cooktop surface is prevented.

Under no circumstances use abrasive sponges or irritating

chemical detergents such as oven sprays or stain removers.

THE MANUFACTURER DECLINES ALL RESPONSIBILITY

FOR EVENTUAL DAMAGES CAUSED BY BREACHING THE

ABOVE WARNINGS.

- 33 -

•Errorcodes:

Error code: Description: Possible causes: Errorrecovery:

C The cooking zone can be

It’s not an error, the user is in

A suitably pan must be placed on the

congured if a static “C” is

the service menu.

relevant cooking zone.

shown.

C/- The cooking zone will be

The user is in the service menu,

Wait for the sysmbol “-” or abort the

congured if a blinking “C”

it’s not an error.

conguration activities by pressing the

is shown. After a successful

selectkey and the “C” does not blink

conguration the relevant

anymore.

display shows “-”.

When the “-” is not displayed

please check the possible

causes of the E/5.

E A blinking “E” on each cooking

The user is in the service menu,

Manual conguration.

zone indicates, that all congs

it’s not an error.

will be deleted.

E/2 Temperature limits are

Electronik temperature to high. System must cool down.

excessed.

E/3 Unsuitable pot. Pot creates on the modul an

1. The error is automaticly cancelled

improper operating point

after 8s and the cooking zone can

which can destroy devices,

be used again. In case of further

e.g IGBT‘.

upcoming errors the pot have to be

changed.

E/4 Uncongured induction

Induction modul is not

1. Delete the hob conguration and

modul.

congured.

activate the manual conguration.

2. Start the UI service menu to

congure the induction modul.

E/5 No communication between UI

No power supply of induction