Sony 2(sl).St.Pin: Connecting digital audio Connecting the controller equipment

Connecting digital audio

Connecting the controller

equipment

1 Insert the Analog Controller (DUALSHOCK®2) into a controller

port of the console.

By using a commercially available optical digital cable, you can enjoy

surround sound with the effect of being in a movie theatre or a concert hall.

When connecting the console to audio equipment with digital connectors,

refer to the instructions supplied with the device to be connected.

Console rear

Connected device

DIGITAL IN

OPTICAL

Commercially available optical

digital cable

Note

Some software titles designate a specific controller port to be used. Refer to the

instructions supplied with the software for details.

Notes

• If you connect the console to audio equipment using an optical digital cable, it may

affect the audio output of some PlayStation®2 format software with the result that

no sound is produced. If this happens, use a cable such as the supplied AV Cable

(integrated audio/video) and connect it to the console's AV MULTI OUT

connector. Do not use an optical digital cable.

• After connecting digital audio equipment, set "Digital Out (Optical)" to "On" in the

System Configuration menu. For details, see "Digital Out (Optical)" ( page 37).

12

Connecting digital audio equipment

Console front

Analog Controller

(DUALSHOCK®2)