Tefal GV 7250: PROBLEMS CAUSES SOLUTIONS Environment protection first !
PROBLEMS CAUSES SOLUTIONS Environment protection first !: Tefal GV 7250
Table of contents
- 1*
- fig. 1 fig. 2
- Important recommendations Safety instructions Description Locking system for retaining the iron on the base - Lock-system
- Preparation What water may be used ? Filling the water tank Using the Easycord system Operating the control panel Use Steam ironing
- Setting the temperature Dry ironing Vertical steam ironing Refilling the water tank TURBO Function (according to model) Maintenance and cleaning Cleaning your steam generator
- Easy descaling of your steam generator: Storing the steam generator Problems with your steam generator? PROBLEMS CAUSES SOLUTIONS
- PROBLEMS CAUSES SOLUTIONS Environment protection first !

PROBLEMS CAUSES SOLUTIONS
F
W
hite streaks come through the holes in
Y
our generator tank is ejecting scale as it
R
inse the collector (see § descaling your
NL
the soleplate.
has not been descaled regularly.
steam generator).
B
rown streaks come through the holes in
Y
ou are using chemical descaling agents
N
ever add this type of product in the
D
the soleplate and stain the linen.
or additives in the water for ironing.
water tank or in the boiler (see page 5 for
what water may be used). Contact an
A
pproved Service Centre.
GB
Fabric fibres have accumulated in the
Clean the soleplate with a non-metallic
holes of the soleplate and are burning.
sponge.
I
The soleplate is dirty or brown and may
Your linen is not rinsed sufficiently or you
Ensure linen is rinsed thoroughly to remove
E
stain the linen.
have ironed a new garment before
any soap deposits or chemicals on new
washing it.
garmentswhichmaybesuckedupbytheiron.
P
You are ironing at too high a temperature. See our recommendations regarding
temperature control setting.
DK
You are using starch. Always spray starch on the reverse side of
the fabric to be ironed.
S
There is no steam or there is little steam. The water tank is empty (red light on). Fill the water tank.
The steam output control dial is set at
Increase the steamoutput (control dial on
FIN
minimum.
the control panel).
The soleplate temperature is set to the
The steam generator operates normally
N
maximum.
butthesteamisveryhotanddry,andhard
to see.
GR
Steam comes out around the collector. The collector is not tightened correctly. Tighten the collector.
TR
The collector seal is damaged. Contact an Approved Service Centre.
The appliance is faulty. Do not use the steam generator and
PL
contact an Approved Service Centre.
The red “water tank empty” light is on. The water tank is empty. Fill the water tank.
CZ
Steam or water escapes under the
The rinse plug seal is damaged. Do not use the steam generator and
SK
appliance.
contact an Approved Service Centre.
The “anti calc” indicator is lit. You have not pressed the “Restart” button. Press the “Restart” button on the control
H
panel.
RUS
If you have any product problems or queries please contact our Customer Relations Team first for expert help
and advice
UA
HR
Environment protection first !
Your appliance contains valuable materials which can be recovered or recycled.
RO
Leave it at a local civic waste collection point.
SLO
If you have any problems or queries please call our Customer Relations team first for expert help and advice:
0845 602 1454 - UK
EST
(01) 677 4003 - Ireland
or consult our website - www.tefal.co.uk
LT
LV
23
EXPRESS-ANTICALC-1800114268-110X154:CALOR8-9-10 19/12/08 15:14 Page 23

