Pyramida CXW-KH 60: CXW-KH 50 Household cooking hoods CXW-KH 60 MAINTENANCE MANUAL EN
CXW-KH 50 Household cooking hoods CXW-KH 60 MAINTENANCE MANUAL EN: Pyramida CXW-KH 60
CXW-KH 50
Household cooking hoods
CXW-KH 60
MAINTENANCE MANUAL EN
DESCRIPTION
Thank you for purchasing Pyramida cooking hood!
Pyramida cooking hoods are reliable and easy-to-work. To guarantee long and nonfailure operation, read the following
manual.
This maintenance manual is combined with technical description and includes data concerning setting and installation,
operating rules and product maintenance regulations.
In connection with the fact that the extractor fan device is upgraded all the time, insignificant discrepancies
between the structure of Your extractor fan and maintenance manual are possible, that do not influence
technical characteristics, maintenance safety and consumer properties.
The product is designed for exhaust ventilation of the
The cooking hood mounted with air duct is related to the
household accommodation spaces heated during the winter
IP23 class devices in the type of protection against access to
time. Commercial operation and use of the product are not
the dangerous parts and water intrusion.
provided for services enterprises, public health services, etc.
The climatic modification of the product is UHL4.2
Never use cooking hood outdoors!
according to GOST 15150-69. It is permissible to run the
Given model can be used for inside filtration (air recirculation
product at temperature of ambient air in limits from +1°C to
inside the premise at installed charcoal filters).
+45°C. The product must be stored in ventilated location in
The product is equipped with illuminating lamps. It is
the manufacturer’s pack at temperature from 0°C to +50°C
supplied with network cable with mains plug and designed
and with related air humidity of not more than 90%.
for connection to the single-phase AC network with voltage of
220…240V and with frequency of 50Hz.
The equipment is adequate to the requirements of
The product is related to the І class devices according to the
Technical regulations for use of some dangerous substances
DSTU 3135.26-98 (GOST 30345.26-98) in type of protection
in electrical and electronic equipment.
against electric shock and supplied with grounding wire
ingressed into the power cable.
Product life cycle: 5 years.
EN
26
EXTRACTOR FAN STRUCTURE
Construction of the cooking hood
Following is included into delivery set:
1 – Top decorative casing
• Cooking hood – 1 pc.
2 – Lower decorative casing
• Mounting bar – 1 pc.
3 – Case of the cooking hood with control panel
• Air duct adapter – 1 pc.
4 – Motor
• Installation kit – 1 pc.
5 – Fat filters
• User manual – 1 pc.
• Warranty certificate – 1 pc.
• Box packaging – 1 pc.
Technical features:
Model
CXW-KH 50 CXW-KH 60
Network voltage, V 220…240 220…240
Frequency, Hz 50 50
Rated current, А 0,65 0,65
Control Mechanical push-button control
Number of motors, pcs. 1 1
Motor power, W 80 80
Overall power, W 160 160
Performance, cubic m./hour 600 700
Noise level, dB 58 58
Amount of fat filters (five-layer
2 2
aluminum), pcs.
Amount of glow lamps (40W), pcs. 2 2
Air duct diameter, mm 120 120
Dimensions without air duct (WxDxH), mm 500х500х940 600х500х940
Weight, kg 9,5 10,8
White / Black / Brown /
Colour
Ivory / Stainless steel
27
OPERATION SAFETY REQUIREMENTS
Single-phase network, to which the
they are under control or have been instructed by the person
product is connected, has to correspond
responsible for their safety. Children have to be under control
to the acting roles. Connection has to
of adults for avoiding of games with the device.
be done via automatic circuit-breaker, built-in to the fixed
wiring on your electric service panel. All actions related to
Pumped air cannot contain dust and other solid impurities,
the connection, adjustment, maintenance and repair of the
and also sticky substances or fibrous materials. It is forbidden
device, and retubing are to be done without line voltage! For
to use the product with present inflammable substances and
this you need to switch off the electric switch on your panel or
their fume, such as spirit, benzine, insecticides, etc.
drag out the plug from the socket. Do not pull the plug wire!
Do not pinch or strain network cable.
Do not shut or bar suction and discharge port of the device,
not to prevent optimal passing of the air. Don’t reduce
Extenders and adapters use is forbidden. Manufacturer
diameter of the air duct to less than 120mm.
of extractor fan does not respond for breakdowns or
inflammations arisen as a result of T-bends or extenders
Do not sit down on the product and don’t put any objects
use. To replace damaged network cable call specialist from
on it.
a service center.
Under the extractor fan one cannot cook such dishes
Before installation it is necessary to be sure that there are
as flambé (dishes that are poured with alcohol and set
no visible damages of the propeller, extractor fan case, and
on fire). Watch that during cooking there is no oil ignition.
also there are no foreign objects in the flowing part of the
Remember that repeated use of oil increases probability of
case, that can damage propeller blades. If you doubt that the
its autoignition.
fan is intact and complete, call the seller immediately.
Do not leave the fan in use unattended for a long time.
It is forbidden to misuse the device, modify it or update.
After the fan has been in use for a long time don’t touch
the backlights – they are hot. While replacement of lamps it
Product is not intended to be used by children and persons
is necessary to disconnect the device from electric network.
with reduced physical, sensory or mental abilities or if they
don’t have any experience in using extractor fans, unless
Don’t touch the fan surface with wet hands.
EN
28
Regularly clean fat filters. Don’t remove fat filters while the
for the safety of children who can play with unused or thrown
fan is running.
out devices).
If non-standard situation of failure arises disconnect the
After product life cycle expiry the device is liable to
device from the network and call the service center, its address
particular utilization. Do not throw the device out
is in the warranty certificate. If you have decided that the
together with ungraded domestic waste.
device is non-serviceable, make it unsuitable for exploitation:
disconnect it from the electric network, cut power cable,
If present maintenance is disregarded, manufacturer is not
remove potentially dangerous parts (it is especially important
responsible for possible malfunctions.
ABSOLUTELY FORBIDDEN!
Do not lead extractor fan air duct to stove and gas appliance flues, intended for water and room heating, to air channels,
intended for other devices.
Do not check the draught of the running fan with torch or open flame – this can lead to fire.
Do not set fire to burners of gas cooker without dishware (e.g. for room heating). Use of open flame can be dangerous
and damage plastic parts of the extractor fan or cause ignition.
Change of fan structure and other interferences into the device by persons not authorized to warranty repair by the
manufacturer, is forbidden
29
ASSEMBLY SAFETY REGUIREMENTS
Before you start to assemble the
product it is necessary to de-energize
the power network!
Minimal distance between cooking
surface and lower plane of the
extractor fan must be:
- for electric fryers – not less than
600 mm;
≥ 650 мм
- for gas fryers – not less than
650 mm.
If you use air duct consisting of
several parts, each next part must be
placed outside relative to previous.
If there is a stove, gas boiler or geyser in the room, it
To guarantee safe operation of the fan in closed space, there
is necessary to take into account that while running the
should be additional air intake from outside (open ventlight in
extractor fan takes air from the room which is necessary for
another room, open door to the kitchen or specially equipped
burning. This also concerns to the room with airtight windows
forced ventilation).
and doors.
If the fan is staffed with electric cable without the plug,
it is necessary to de-energize the network according to the
following scheme:
BROWN wire = L («live»)
BLUE wire = N («neutral»)
GREEN and YELLOW wire = Е («earth»)
EN
30
CONTROL PANEL
Do not forget to turn on cooking hood while starting to
1. Turn on or off the lightning.
use the kitchen stove or cooktop. It is necessary for normal
2. Turns off the fan.
ventilation of the kitchen.
3. Turns off the low speed of the
For full ventilation it is necessary to turn off cooking hood
fan.
4. Turns on low speed of the
after duration of the period of 15 minutes after cooking.
fan.
The cooking hood is equipped with front control panel
5. Turns on high speed of the
constituting the row of buttons. The speeds are switched by
1 2 43 5
fan.
the means of the buttons «•», «••», «•••».
Operation of the cooking hood is enough at low speeds at
simultaneous work of all fore burners.
reheating of the food. Average speed is used for standard
Switching of the speed buttons can be performed in any
conditions of cooking (boiling and frying).
order. Use the button “0” for fan turn off.
The high speed is designed for removal of the large amount
of vapor, smoke and mixed kitchen odors from the premise, at
RECIRCULATION
The following actions must be done for work of the cooking
hood in mode of an air recirculation:
- Do not connect cooking hood to the air duct (it is allowed
not to install an air duct adapter );
- install casing of the air duct in such a way as jalousies on
it not to be overlapped;
- Install additional charcoal filters into the cooking hood
(2 pcs.).
The charcoal filters are not included into the delivery set of
the cooking hood and should be purchased separately.
The charcoal filters are not subject to cleaning and should
be replaced with new after 3-4 months.
31
INSTALLATION OF EXTRACTOR FAN TO THE WALL
1. Mount the back surface
of the cooking hood to
Mounting
the wall by the means of
points
the screws with dowels
from the installation kit.
2. Install the adapter of air
duct onto the cooking
hood by the means of
screws with use of seal
from installation kit.
3. Connect the air duct
to the adapter of the
Mounting points
cooking hood. Take out
another end of an air duct
to the air-shaft. Ensure
that chinks are absent in
the connections.
4. Install casings of an air
duct and fix them with
screws from installation
kit.
EN
32
PRODUCT MAINTENANCE
The works on maintenance should be performed on
- Regularly remove all food debris and fat from the lower
cooking hood with the purpose of maximal performance and
surface of the cooking hood and from aluminum fat
effectiveness of its operation during the life time.
filters. An excessive fatness can lead to fire!
- Wipe the external surfaces of the cooking hood with the
The cooking hood should be discon-
humid, good squeezed flannel tissue.
nected from the power network at
- Use special fluids creating the protective film for handling
works connected to the maintenance
the surfaces made of stainless steel.
on cooking hood.
- Do not use the abrasive agents and solvents.
- Verify the conditions of the air duct of cooking hood and
Regularly perform following actions at maintenance:
ventilation channel, clean them at necessity!
BACKLIGHTS REPLACEMENT
In the extractor fan lighting lamps of type Е14 are used,
- press the filter lock and take off the fat filter;
their power is not more that 40 W. Replacement of lamps is
- Unscrew an old lamp from the holder and screw the new
made in the following order:
one;
- Make sure that cooking hood is disconnected from power
- press the filter lock and install the fat filter into the cooking
network before lamps replacement; wait until lamps will
hood.
cool down.
E14 40Вт
33
FILTER CLEANING
Extractor fan is equipped with removable protective fat
Manual cleaning is carried out in the following order:
filters. Filters guarantee absorption of suspended solids,
- remove the filter, having pressed the filter lock beforehand;
that’s why they can become dirty depending on frequency of
- wash the filter with cleaning agent or suds with the help
fan use.
of sponge or dauber;
- thoroughly wash the filter with warm water;
To guarantee maximum capacity and efficiency of fan
- wait until the filter is absolutely dry;
work, it is necessary to regularly clean fat filters from
- set the filter into the extractor fan, having pressed the
contaminations.
filter lock beforehand.
In case of cleaning with a dishwashing machine make sure
Cleaning is carried out each 5-6 weeks by hand with suds
that the cleaning agents you use with your machine do not
without strong mechanical effect or in dishwashing machine.
contain deleterious substances that may damage the surface
of aluminum filter details. In the dishwashing machine, place
filters vertically to avoid food remains getting in. Before
Cleaning of fat filters periodicity
installation of the filter into the fan after washing in the
increase complicates air absorption
dishwashing machine make sure that the filter is dry. In case
by the fan. This leads to engine load
of failure to comply present roles the filter may be damaged!
increment and may influence extractor fan life time.
EN
34
WARRANTY
The product obeys the following European norms:
At purchasing of the product press for warranty certificate
directive of EMC 89/336/EEC, 92/31/EEC,
correct filling in.
93/68/ЕЕС and IEC 60335-2-31.
Warranty service is not performed in the following cases:
Manufacturer guarantees normal operation of the product
- by failure to comply with rules stated in the manual;
during 24 months since the day of sale through retail
- by reduction of the air duct diameter to less than
distribution network on condition that transport, storing,
120 mm;
mounting and exploitation regulations, stated in present
- by presence of obstacles to free air circulation from the
manual, are fulfilled. If your extractor fan does not work in
extractor fan to air channel exit;
a proper way, call service center, maintaining TM Pyramida
- by incorrect assembly, in case of opening or wiring pod, by
products, and do not forget to report the following information:
replacement of the network cable;
- number of warranty policy;
- by supply network contradiction to the parameters set by
- product model;
the manufacturer;
- serial number, stated on information label of the fan or in
- by mechanical or other damages of the device as a result
the warranty certificate;
of rough handling;
- failure description.
- by installation of the fan lower that in 60 cm from burners
Claims won’t be considered without warranty certificate
and heaters.
with the date of sale and stamp of commercial organization.
35
Оглавление
- CXW-KH 50 Витяжки кухонні побутові CXW-KH 60
- CXW-KH 50 Вытяжки кухонные бытовые CXW-KH 60 РУКОВОДСТВО ПО ЭКСПЛУАТАЦИИ RU
- CXW-KH 50 Household cooking hoods CXW-KH 60 MAINTENANCE MANUAL EN
- CXW-KH 50 Montage- und Bedienungsanleitung CXW-KH 60 BETRIEBSANLEITUNG DE
